Re: [Southfloridapreppers] September 16, Monthly BBQ for South Florida Survivalists Network Group Meetup Equipment Demos and Sale

From: Cliff
Sent on: Thursday, September 22, 2011 5:52 PM
Image Detail
Hi Chris,
 
This is one of the export only radios I am looking into for you.  As with most of these, it will need to be converted from ham only to CB and ham.  It will probably just need a jumper, however it will be recommended that it gets a peak and alignment tune up when it is done.  Then all you have to do is stay off the ham frequencies [masked]) and you will have tons of semi private channels to choose from.
 
With all of these radios it is also recommended that the stock mic is replaced with a (real) professional noise canceling mic. 
 
I choose this as one option (so far) as it does not have garbage like echo and talk back installed in it.  It also does not have sideband.  That can be a plus or minus depending on if your group  of users is technical enough to be able to tune in other users (it is not real hard).  If you decide you want sideband (I have it) let me know. It is a little more, but it might be better to have it and not need it than to need it and not have it (like with a gun).
 
When it is done it will have 240 + channels  (note the A B C D E F dial)  40 channels per each band (AM[CB] &FM [PROFESSIONAL QUALITY].
 
The   ** "+" ** is for the secret channels that are hidden in-between certain channels that are not always accessible to standard radios.
 
When you get which ever model you decide on I will give you all the information on all the hidden channel locations within these radios.  One example FYI is between channels 3 & 4.  the frequency counter on channel will read[masked] the frequency counter on channel 4 will read 27.005.  Since there is 10kc channel spacing between all the frequencies you will see that
 
3   =  [masked]
3a =  [masked] is missing when the dial goes from channel 3 to channel 4
4   =   27005
 
There is a 10kc switch on the front panel of these radios.  Turn the switch on when the radio is on channel 3, and you will observe the frequency counter jump to the hidden channel (nice).
 
Any way I am still looking, there are tons of these to go through to weed out the undesirables.\
 
Remember it will be radio + mod + tune up + noise canceling mic + antenna for each complete unit when you are all set up.   You might also want a high amp power supply or solar panel battery back up, set up for a base station operation.
 
Call me and we can go over the features.  The exporter is sending me a new catalog that should be in the mail to me on Monday.  *Note there are tons of these radios out there and many users are currently using these in the US.
 
Cliff
[masked]   
 
 
 
 
 
 
----- Original Message -----
Sent: Tuesday, August 30,[masked]:36 PM
Subject: [Southfloridapreppers] September 16, Monthly BBQ for South Florida Survivalists Network Group Meetup Equipment Demos and Sale

People have been emailing requesting information on the Meetup on September 16th at 430pm at Dixie Guns and Ammo.

 

The BBQ is on the main page of the South Florida Survivalists network , link is here

 

http://www.meetup.com/Southfloridapreppers/

 

The specific BBQ Meetup link is here

 

 http://www.meetup.com/Southfloridapreppers/events/30891561/

 

 

Date, time, and location is on the pages.......Please RSVP if you can, but it is not necessary.

 

And if you need good deals on guns or ammo,  check out the pages for the group ammo and gun buys with Dixie Guns and Ammo going on at the Meetup. (All Local, Stated, and Federal Laws apply to all purchases and customers).

 

Looking forward to seeing you there.

 

Best,

Chris





--
Please Note: If you hit "REPLY", your message will be sent to everyone on this mailing list ([address removed])
This message was sent by Chris J Petrovich ([address removed]) from South Florida Survivalist Network.
To learn more about Chris J Petrovich , visit his/her member profile


Meetup, PO Box 4668 #37895 New York, New York[masked] | [address removed]

This email message originally included an attachment.

Our Sponsors

People in this
Meetup are also in:

Sign up

Meetup members, Log in

By clicking "Sign up" or "Sign up using Facebook", you confirm that you accept our Terms of Service & Privacy Policy