Ron Paul Sign Bomb, Buckland Hills Mall October 10th

Folks, We will be conducting a Ron Paul Sign Bomb on Monday, October 10th, 2011, from 4:30-6:30pm. This will be at the corner of Buckland St. and Buckland Hills Drive in Manchester. There is a grassy area in the south east corner of the intersection where we will be standing. People can park in the commuter parking lot across the street behind the Dunkin Donuts. Don't have a sign? Contact us and will hook you up. There will be lots of additional signs there for those of you who just drop in.

Join or login to comment.

  • Safety J.

    I'm very please that this sign wave accomplished a lot in regards to getting this meetup group active and motivated again.

    October 16, 2011

  • A former member
    A former member

    Hey Everybody!!! Great sign bomb yesterday. Glad to meet you all. Wasn't it great how many people honked their horns and gave us thumbs ups? Amazing how few people shouted anything negative at us. The message of Liberty is spreading!

    October 11, 2011

  • Earl L.

    A great, enthusiastic showing. The groups numbers and interest appear to be picking up again as more folks discover Ron Paul's 2012 campaign. So great to meet people who are paying attention to this countries problems and helping to spread the word to others.

    October 11, 2011

  • Tim

    This was a good start. Hope for many more.

    October 11, 2011

  • A former member
    A former member

    Any Ron Paul Meetup rates a "GREAT" for experience

    October 11, 2011

  • Safety J.

    Feel free to call the local media ( TV and newspapers ) Maybe they'll send someone out to cover this sign wave.

    October 10, 2011

  • Safety J.

    That sounds good. I think another sign wave on black friday would be good too.

    October 10, 2011

  • Tim

    Nice Joe! I put one on the train bridge this morning. Also, I have a suggested meetup for a Ron Paul Republican registration Bomb. Let me know your thoughts on that.

    October 10, 2011

  • Safety J.

    I'm bringing 15 ' Ron Paul 2012 ' signs, 13 ' End the FED ' signs and 140 DVDs.

    October 10, 2011

  • Tim

    The increased attendance is getting me pumped up!

    1 · October 9, 2011

  • Safety J.

    Ron Paul Sign Bomb 10/10/11
    http://www.youtube.com/watch?v=...­

    October 9, 2011

  • Tim

    Hey Doug, my number is[masked]-6102. Call me when you want to get going. See you at the sign bomb.

    October 6, 2011

  • Safety J.

    If any of you have a bullhorn - feel free to bring it to the sign wave.

    October 5, 2011

  • Safety J.

    Nope, I wouldn't use magnets because if anything like that falls on a cars windshield it'll go right trough it and kill the person. I don't use bed sheets. I use tyvek from home depot, but because the highway crew and / or obama thugs steal them I'm going to mostly use mine for sign waves where they wont get stolen.

    October 5, 2011

  • Tim

    Get pumped Douglas!! After the sign bomb on the 10th I'm going on a sign blitz in my area. Lets plaster this state!

    October 5, 2011

  • Tim

    The fence has a sign for a car dealership bolted to it, making it a flat solid surface. Can't use zip ties. Maybe magnets.

    October 5, 2011

  • Safety J.

    What makes it tricky? I just use zip ties on the overpass fences.

    October 4, 2011

  • Tim

    I walked over that train bridge this afternoon. Its accessible but it will be tricky to attach the sign. I'm working on a solution as I speak.

    October 4, 2011

  • Tim

    There have been ron paul people at these rallys. I'm going to see if there is a RP presence so I can recruit them for our sign bomb. Worth a try.

    October 4, 2011

  • Safety J.

    I still think one on that train track overpass would be sweet though.

    October 4, 2011

  • Safety J.

    I'm making 145 DVDs. If my signs are just going to get stolen from the overpasses I think I might just use them for the actual sign waves instead. The ' Stop Wars ' sign is very cool, but it's too large for a sign wave. I can make 3 ' End The Fed ' signs instead of 1 ' stop wars ' sign. So for right now I'm focusing on trying to make enough ' End The Fed ' signs so each person that goes to the sign wave can take one of those, one of the ' Ron Paul 2012 ' signs and some DVDs home with them.

    October 4, 2011

  • Safety J.

    I noticed that the first comment left on that site starts off by saying " Hello Comrades! " --- Maybe you could try to wake up those commies to the difference between capitalism and corporatism and while you're at it see if they'll help push to reinstate the Glass Steagall Act.

    October 4, 2011

  • Safety J.

    Yeah, try to do this http://www.youtube.com/watch?v=...­

    October 4, 2011

  • Tim

    Hey guys check out this link. http://www.occupytogether.org/e...­

    This would be a good place for some RP support.

    1 · October 4, 2011

  • Tim

    Will do. I'll try to get one on the train bridge on the 10th.

    October 3, 2011

  • Safety J.

    A lot of times it's the highway crew that pulls them down. That's why I like to use overpasses that don't have an exit. That way it makes it harder for them to take them down. You might want to keep an eye out in your area for public places that other people post political signs that don't get removed and see if there's a good spot that you could drive a few tomato stakes into the ground to give you something to tie the sign to. There might even be a few trees at the spot you could use instead.

    October 3, 2011

  • Safety J.

    If you would be able to work some magic and get one up on that railroad that would be awesome. I'm making about 100 DVDs, but we will only probably get to pass out a few during those 2 hours.

    October 3, 2011

  • Safety J.

    You can make a few 'FREE DVD' signs if you want. If your signs are getting taken down fast then maybe you shouldn't put them up early or maybe you should just take them down after the sign bomb and only put them up again on the weekends. Overpasses that have a lot of people that walk over them aren't good places because you'll probably get some obama thugs that'll tear them down at night. I haven't checked the ones I put up in a few days, but they were up for over a week.

    October 3, 2011

  • Tim

    Hey guys, just got an email from the hartford county group. They will try to steer a few people to our location if possible.

    1 · October 3, 2011

  • Tim

    Hey Joe, forgot to mention Pradeep and I took some signs to a tea party rally on Saturday. They were not advertising any candidates so we made it look like a Ron Paul rally! It was great. Maybe this is something we should do more often.

    1 · October 3, 2011

  • Tim

    I can hang as many as you can make. The ones I put up were taken down. Damn shame. I made some cool advertising handouts for the meetup group, we can hand them out with the DVDs. How many are you making? Are you making the free dvd sign or should I? I can do it tomorrow if necessary.

    October 3, 2011

  • Safety J.

    I'm also burning a lot of those ' For Liberty ' DVDs with sleeves that read ronpaul.meetup.com on them. I figure if a person wants to stand on one of the other corners to that intersection there might be a few ron paul supporters that pull off the road and walk over and that would be a good time to give them a DVD with the meetup address in hopes that they'll join. If not I'm sure they'll find a good use for the DVD. Maybe a sign that says ' FREE DVDs ' would attract more people too.

    October 3, 2011

  • Safety J.

    Hey Tim, let me know how many more of my freeway signs you've found places for and I can meet up with you at the end of the week so you can put them up early if you want. I have 15 right now and I'm going to try to make about 15 more. I'm also working on making the 3 ft x 6 ft stop wars sign that looks like the star wars sign. If they come out good I should have a few of those done too. The ' end the fed ' sign is too small for the freeway, but if I get any done before monday I'll bring them.

    October 3, 2011

  • Tim

    I hope more people will join the sign bomb. We need a strong show of support for Ron Paul!

    2 · October 3, 2011

  • Safety J.

    The one I made that looks like ' star wars ' is short, sweet and easy to cut out. It's only 2 levels so it can be made large enough to be read from a freeway overpass and the gaps that make it a stencil can be filled in with a paint brush after.

    October 2, 2011

  • Safety J.

    I think yours is good pradeep, but it would be the most difficult to make and the hardest to read when driving by the sign bomb. What would make it a little easier to make when cutting it out of plywood would be that the stencil font be more bold like the one on the revolution part. The thin areas on the font you used would be hard to cut out and wont show up well on the sign.

    October 2, 2011

  • Safety J.

    Hows this for an anti war sign stencil? http://i1134.photobucket.com/al...­

    October 2, 2011

  • Safety J.

    okay, I modified an end the fed picture to be in the form of an actual stencil. http://i1134.photobucket.com/al...­ Now I just need to find an anti war one.

    October 2, 2011

  • Safety J.

    painted white. I'll bring everything I've got with me and maybe next weekend I'll meet with Tim so he can have more of the large ones to put on some more freeway overpasses in his area. If you want to make your own signs please do. An easy way is to go to your local bicycle shop and get some of the large cardboard boxes they have in their recycle bin. Then paint over them with some cheap white wall paint and after it dries use some other dark paint to make the letters for your sign.

    October 2, 2011

  • Safety J.

    I'm having a hard time finding any pictures online that are in the form of a stencil so I can make some different signs. If I make one for ronpaul.meetup.com I need the meetup.com part and I can't find any stencil pictures for an end the fed sign or an anti war sign. I'm making a lot of the large ones and I also have another stencil for smaller 1 ft x 2 ft signs that look just like the large ones for the freeway overpasses except they're smaller and I just put them on cardboard that I've.......

    October 2, 2011

  • Tim

    I'm in. Also,I sent an email to the Hartford county sign bomb leader to see if they want to team up to increase our footprint. If we are doing it at buckland hills that is part of Hartford county.
    Should we bring signs to the rally on the 1st for some exposure?

    September 29, 2011

  • Tim

    Today I put up a couple of Ron Paul signs (made by Safety Joe) on an overpass on I384 East and West in Manchester. People were honking like crazy. Maybe we should make signs for the meetup group. Just an idea.

    1 · September 29, 2011

  • Tim

    Can't wait! It's on now!

    September 29, 2011

14 went

People in this
Meetup are also in:

Imagine having a community behind you

Get started Learn more
Rafaël

We just grab a coffee and speak French. Some people have been coming every week for months... it creates a kind of warmth to the group.

Rafaël, started French Conversation Group

Sign up

Meetup members, Log in

By clicking "Sign up" or "Sign up using Facebook", you confirm that you accept our Terms of Service & Privacy Policy