Re: [gctechspace] See you tonight!

From: Steve D.
Sent on: Wednesday, July 11, 2012 10:38 PM
Dave I'm just uploading my pics to the meetup site..

Yes - it was a great meetup .... well done on fixing Mork (I'm going to keep plugging away with the names :))

We should get started right away building mindy too so we know what parts we are missing. 

If someone can get some bearings that would be good - we used the last ones last night - I think Mark said he had a good ebay source.

Steve

On Wed, Jul 11, 2012 at 10:31 PM, David B <[address removed]> wrote:
Haven't been to the space in a while. Those new shelves look wicked! 


The guys made sweet progress on the next reprap tonight. It now stands up on it's own :)
I guess the next big item is the challenging hot end assembly.

Also we fixed up reprap #1, an observant onlooker spotted the loose grub screw that was causing our belts to slip.
So it now prints out somewhat usable parts.
thermostat problem was located, will need to re-solder that connector to the sanguinololu board and we should be right to go!

Pics of the new reprap in progress should be up on the blog shortly. 
(feel free to email me your own pics and I can add them to the blog, or add them yourselves ! )

Dave



On Wed, Jul 11, 2012 at 6:19 PM, Steve Dalton <[address removed]> wrote:
Will be good to see you mate....

Good news from me too.... while I was out today - the arcol hotends arrived. I also have GCTechSpace stickers - so everyone who attends the meetup tonight will get a free sticker. Will be $1 each after tonight as I did pay for these out of my own pocket.

I started working on reprap today but was short of washers - if you have any spare feel free to bring them along. I also have a spare hacksaw I will donate to the space.

Does anyone know where the 2 grey top pieces (on tip of triangle) from reprap #3 went? - at the moment we have pink one on there but I was hoping to keep the grey/black/vader theme going on there. They were definitely in the pack I purchased from Trifid.... I do hope no-one took them as they were mine that I paid for myself.

Steve


On Wed, Jul 11, 2012 at 5:13 PM, David B <[address removed]> wrote:
Hey guys!

Just remembered we're meeting up tonight. 
I'm heading on up. Tight schedule so only got time to drop down some brochures and have a quick play with the reprap :)
Bringing down another hacksaw to help out with cutting the bits up for reprap #2 and #3.

Cheers,
Dave




--
Please Note: If you hit "REPLY", your message will be sent to everyone on this mailing list ([address removed])
This message was sent by David B ([address removed]) from Gold Coast Techspace.
To learn more about David B, visit his/her member profile
Set my mailing list to email me As they are sent | In one daily email | Don't send me mailing list messages

Meetup, PO Box 4668 #37895 New York, New York[masked] | [address removed]



--
Steve Dalton, President
Gold Coast Tech Space
3b/51 Johnston St, Southport, Q 4215





--
Please Note: If you hit "REPLY", your message will be sent to everyone on this mailing list ([address removed])
This message was sent by Steve Dalton ([address removed]) from Gold Coast Techspace.
To learn more about Steve Dalton, visit his/her member profile





--
Please Note: If you hit "REPLY", your message will be sent to everyone on this mailing list ([address removed])
This message was sent by David B ([address removed]) from Gold Coast Techspace.
To learn more about David B, visit his/her member profile
Set my mailing list to email me As they are sent | In one daily email | Don't send me mailing list messages

Meetup, PO Box 4668 #37895 New York, New York[masked] | [address removed]



--
Steve Dalton, President
Gold Coast Tech Space
3b/51 Johnston St, Southport, Q 4215
+61 [masked]

Our Sponsors

People in this
Meetup are also in:

Sign up

Meetup members, Log in

By clicking "Sign up" or "Sign up using Facebook", you confirm that you accept our Terms of Service & Privacy Policy