align-toparrow-leftarrow-rightbackbellblockcalendarcamerachatcheckchevron-downchevron-leftchevron-rightchevron-small-downchevron-small-leftchevron-small-rightchevron-small-upchevron-upcircle-with-crosscrosseditfacebookglobegoogleimagesinstagramlocation-pinmagnifying-glassmailmoremuplabelShape 3 + Rectangle 1outlookpersonplusImported LayersImported LayersImported Layersshieldstartwitteryahoo

Mailing List Archive

Subject Sender Date
Re: Hackerspace Adelaide wants your stories. - Fyi Ryan http://groups.google.com/group­/ozhs-net?hl=en Lawrence D. May 24, 2012 12:13 PM
Hackerspace Adelaide wants your stories. - Okay, so hackerspace-adelaide has finally submitted the paper work to become incorporated(after having regular meetings to socalize build etc), and is now looking at membership structure/fee's so we can get some stable income so we can start looking a Ryan L. May 24, 2012 1:42 AM
Fwd: Visit from Griffith Uni - I was there today, a one man Jelly, if you will. I played around with a few things: Tidied up tools and stuff in general. Mopped and cleaned a bit too. Sorted fasteners, (screws, bolts, washers, nails) into one multi-storage case, Elec David T. May 24, 2012 12:48 AM
Re: [gctechspace] HSBNE Visit? - Hey guys! I was taking up two other members with me but I ended up having a three hour long conference yesterday afternoon so couldn't attend! Sorry! I adjusted the meetup link/date & time appropriately for next Tue. Im really k Lucas B. May 23, 2012 9:16 AM
Re: [gctechspace] HSBNE Visit? - I have a feeling it didn't eventuate.... we'll try again another time. I'd like to come up some time too... but was in Sydney all week this week. For the podcast I've interviewed the guys at Shanghai hackerspace and also the guy from Colog Steve D. May 23, 2012 8:36 AM
HSBNE Visit? - Hi guys, just wondering what happened as I was looking out for you guys and didn't see you. Lawrence D. May 23, 2012 8:12 AM
Meetup details changed: How Stuff Works: Laptops (OLPC) - I've updated this Meetup. For more details, see the full listing: http://www.meetup.com/gctechsp­ace/events/62563472/ When : Saturday, May 26,[masked]:00 AM Steve D. May 23, 2012 8:05 AM
Re: [gctechspace] 3D scanning and printing - Sunday 20 May, 12pm to 2pm at GC Techspace - That's awesome, maybe I can pay the space to scan and print some small replacement plastic brackets for my boat. On Sat, May 19, 2012 at 12:22 PM, Gavin Metzler < Lucas B. May 19, 2012 7:09 PM
Fwd: Kits for sale + Robots - Hi All Xinchejian have a whole load of electronics kits for sale.... all really good prices - here's some photos for those interested. I've already bought a couple of arduino kits - they are like the spa Steve D. May 19, 2012 1:44 PM
3D scanning and printing - Sunday 20 May, 12pm to 2pm at GC Techspace - I got my Kinect based 3D scanner working. I will also bring my Ultimaker 3D printer. Come along and see some 3D "photocopying". Gavin M. May 19, 2012 12:22 PM
Re: TechSpace RepRap - On Fri, May 18, 2012 at 4:18 PM, Steve Dalton < [address removed] > wrote: David T. May 18, 2012 11:08 PM
Re: [gctechspace] Webcam update - night vision! - That's one lamp on the timer that you set, Lucas. On Wed, May 16, 2012 at 10:19 PM, David B < [address removed] > wrote: David T. May 16, 2012 10:59 PM
Re: [gctechspace] Reprap printing blues - triff did you get that key? On Wed, May 16, 2012 at 10:38 PM, Triffid Hunter < [address removed] > wrote: Lucas B. May 16, 2012 10:45 PM
Re: [gctechspace] Reprap printing blues - On Wed, May 16, 2012 at 5:36 AM, David B < [address removed] > wrote: Triffid H. May 16, 2012 10:38 PM
Re: [gctechspace] Reprap printing blues - ahhh! I was trying to change options in Slic3r to get a result.  so E steps = firmware.  On Wed, May 16, 2012 at 10:34 PM, Triffid Hunter < David B May 16, 2012 10:36 PM
Re: [gctechspace] Reprap printing blues - each roll of filament will have a different diameter, which means a different volume of plastic per unit length. I record an E step value for each roll, although the stuff I've been getting from vik is very consistent Triffid H. May 16, 2012 10:33 PM
Re: [gctechspace] Webcam update - night vision! - On Wed, May 16, 2012 at 10:15 PM, Lucas Brandt < [address removed] > wrote: David B May 16, 2012 10:18 PM
Re: [gctechspace] Webcam update - night vision! - I was just on it, is there a lamp still on in the space? On Wed, May 16, 2012 at 10:13 PM, David B < [address removed] > wrote: Lucas B. May 16, 2012 10:15 PM
[gctechspace] Webcam update - night vision! - Hey Techspacers, We've had a webcam upgrade! Thanks to DavidT for his IR camera.  IR night vision turns on automatically as well. More info on the blog: David B May 16, 2012 10:13 PM
Re: [gctechspace] Reprap printing blues - I think something must have happened when I pull out the pink... sorry! Triffid - you listening? Usually when it's gappy like that it's the n-steps. On Tue, May 15, 2012 Steve D. May 16, 2012 9:56 PM
Fwd: Transit of Venus June 6th, last one in over a hundred years and, we've got less than a month to prepare! - Steve Dalton, President Gold Coast TechSpace 3b/51 Johnston St, Southport, Q 4215 +61 [masked] http://gctechspace.org ---------- Forwarded message ---- Steve D. May 16, 2012 9:29 AM
Raspberry Pi in the news - This was on the home page of The Australian.com.au and Gold Coast.com.au this morning http: Gavin M. May 16, 2012 7:49 AM
Re: [gctechspace] Reprap printing blues - The last print I ran seemed not to push enough PLA through. The extruder was spinning extremely slowly compared to when we had the pink PLA in.  Maybe something has bumped loose?  If the extruder seems to be spinning normally, David B May 15, 2012 10:34 PM
Reprap printing blues - The reprap is running again. I did a test print of Steve's Refactor logo, using the blue PLA that was loaded up a week back. See the result at   http://www.meetup.com/gctechsp­ac David T. May 15, 2012 5:22 PM
Meetup details changed: HSBNE Excursion - I've updated this Meetup, setting a possible date and time, today. The time would be for meeting at our TechSpace prior to departure from there. For more details, see the full listing: David T. May 15, 2012 12:20 AM
Crowdsourced Shelving - Hi All   Our crowdsourced Shelving project is going quite well, I emailed a few people on Friday and we are now at 34% http://ipledg.com/projects/gol­d- Steve D. May 14, 2012 1:40 PM
new Gimp is out! version 2.8 - most of you probably already know, but Gimp 2.8 was released recently. the update just came through to my Ubuntu laptop. details:  http://www.gimp.org/release-no­tes/gimp David B May 13, 2012 8:03 PM
linux mint - Hey all, I'm installing Linux Mint - any advice from people who have used it? Cheerio, Dave David B May 11, 2012 10:59 AM
Meetup details changed: Sunday afternoon hangout - I've updated this Meetup series. The nominated start time is now half-hour earlier, 12 noon. However members might arrive and open the Space earlier. Our  Space Door web page will always show you when the door David T. May 9, 2012 11:15 PM
Fwd: [Linux-aus] $11.7m for OLPC Australia in the federal govt budget - ---------- Forwarded message ---------- From: Sridhar Dhanapalan < [address removed] > Date: Wed, May 9, Steve D. May 9, 2012 4:10 PM
Fwd: New email flyer - Books are here! - Preview not available Steve D. May 5, 2012 8:45 AM
Re: [gctechspace] Intel's version of raspberry pi - Considering the main reasons I like PI are power consumption and price then I'm not sure if I'll be getting one of these. Still interesting though - great to see competition.  Read The Innovators Dilemma - less is nearly always Steve D. May 3, 2012 11:45 PM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - I have added the text ... "You can also see and add ideas into [[ How Stuff Works ]] if you want to demonstrate a core technology relating to a project you want to David T. May 3, 2012 10:24 PM
Intel's version of raspberry pi - Intel has announced a very small form factor PC that will s BW~Merlin May 3, 2012 10:58 AM
Android tablets starting at $60! - This short message  is sent to you from my Aldi special, Android smartphone mate. Don't expect epic prose :-). ---------- Forwarded message ---------- From: "TOMTOP Online Shop" < David T. May 2, 2012 9:44 PM
Recent ABC radio podcasts - Hi all Have been listening to a few podcasts from ABC - FutureTense program Digital c Paul B. May 1, 2012 5:24 PM
Re: [gctechspace] Hackerspace Passports - It's more for when you visit other hackerspaces - when you go up to Brisbane. I am going to get mine stamped when I go to Shanghai and Sydney hackerspaces next month. Steve On Tue, May 1, 2012 Steve D. May 1, 2012 12:53 PM
Re: [gctechspace] Hackerspace Passports - That is really cool, good way of recording event attendance On Tue, May 1, 2012 at 10:08 AM, Steve Dalton < [address removed] > Lucas B. May 1, 2012 10:30 AM
Hackerspace Passports - I'm thinking of ordering some Hackerspace passports - anyone interested? http://littlebirdelectronics.c­om/products/hackerspace-passpo­rt Steve D. May 1, 2012 10:08 AM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - Yeah thas why i mentioned it as a seperate meetup day of ballistics etc, just another thing on top of how stuff works to spark interest. I'll get onto listing it now. :-) On Tue, May 1, 2012 at 6:43 AM, Steve Dalton Lucas B. May 1, 2012 8:34 AM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - Put them in the wiki (nothing illegal though please) and we'll put them up as meetups. If people RSVP we'll do them, if not you dump the idea and move to the next one. I'm wondering if all the physics (and chem) stuff might Steve D. May 1, 2012 6:43 AM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - We should do a day of ballistics & physics,  a favourite of mine (and I'm sure Triffid's) :-D I'll buy two or three low altitude model rocket kits and we can race and build in groups Steve can Lucas B. Apr 30, 2012 9:48 PM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - Nobody wants to stick matches down test tubes, thats sooo 90's textbook. Pressurise a 330ml plastic coke bottle half filled with water and make it blow 50m away. On Mon, Apr 30, 2012 at 9:39 PM, Kobr Lucas B. Apr 30, 2012 9:40 PM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - You can collect it in a sealed container, let it build some "small" pressure & DETONATE it from a distance on the other side of the carpark, providing the casing/plastic bottle with water inside (suitable) wont fragment and the pressures kep Lucas B. Apr 30, 2012 9:39 PM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - Ourboard motor would be awesome - fits nicely into the How Stuff works thing.  I would also like to see the "How Electrolysis Works" using the batteries cores that you spoke about - that's uber cool. Can you collect the ga Steve D. Apr 30, 2012 9:27 PM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - Good point, although the way it scans is really cool and we could implement it into some cool things to show "how stuff works"  I know theres been interest wanting to know how to refit computers/desktops etc for upgrades and so on Lucas B. Apr 30, 2012 9:19 PM
Re: [gctechspace] Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - The idea of the how things work meetup  is to actually take things apart - I wouldn't want to take a Kinect apart - it's too valuable to us assembled. Taking apart an old PS2 or something though could be good. We'll probab Steve D. Apr 30, 2012 9:11 PM
Re: Re: Steve Dalton posted a comment for How Stuff Works meetup - Re; Steve - Ideas for "How stuff works'" Maybe a Kinect? I'm happy to buy one, and I know Triffids keen to get his hands on one, and his technical knowledge would Lucas B. Apr 30, 2012 7:22 PM
Fwd: [CCHS] Raspberry Pi on ABC RN Future Tense. - Some good raspberry PI articles. ---------- Forwarded message ---------- From: John Kent < [address removed] > Date Steve D. Apr 30, 2012 4:52 PM
The Space is open - Hey guys, The space is open this afternoon for few hours :-) Here now. Regards, Lucas Bra Lucas B. Apr 29, 2012 1:17 PM
Meetup details changed: Lego Mindstorms Robotics education session - I've updated this Meetup. For more details, see the full listing: http://www.meetup.com/gctechsp­ace/events/58510472/ When : Saturday, May 5,[masked]:30 AM Steve D. Apr 29, 2012 8:50 AM
Re: [gctechspace] Meetup details changed: Lego Mindstorms Robotics education session - yes - thanks. On Sun, Apr 29, 2012 at 8:42 AM, Lawrence Dixon < [address removed] > wrote: Steve D. Apr 29, 2012 8:49 AM
Re: [gctechspace] Meetup details changed: Lego Mindstorms Robotics education session - Err, should that be 10:30am, not pm? On 29 April[masked]:29, Steve Dalton < [address removed] > wrote: Lawrence D. Apr 29, 2012 8:42 AM
Meetup details changed: Lego Mindstorms Robotics education session - I've updated this Meetup. For more details, see the full listing: http://www.meetup.com/gctechsp­ace/events/58510472/ When : Saturday, May 5,[masked]:30 PM Steve D. Apr 29, 2012 8:29 AM
Gold Coast TechSpace Ipledg project - Hi All Bryan Vadas from Ipledg, a Gold Coast based crowd-funding startup, has been asking me to put a TechSpace funding proposal on Ipledg for sometime and I finally just got around to it. The proposal is for Steve D. Apr 25, 2012 10:28 PM
Fix for Reprap 1? - I looked at the X axis carriage timing belt from above. It is not parallel to the X axis guide rails. Implications: Perhaps this is enough to result in the slightly oval shape of printed stuff that should be round, as the x stepper motor will David T. Apr 24, 2012 7:48 PM
RE: [gctechspace] Building a group gctechspace rocket? - The ball starts a rolling... http://www.meetup.com/gctechspace/events/61827802/ On Fri,[masked] at 09:42 -0400, BW~Merlin wrote: > Stick it up on the techspace meetup page as a suggested event and if > enough people say they want to come then it Ben M. Apr 24, 2012 8:11 AM
Check out Gold Coast TechSpace on foursquare - If anyone does foursquare,  feel free to check in when you come to the space.  Also add tips and photos...  It's a good way to spread the word I thought you'd like this place I found on foursquare: Gold Coast TechSpac Steve D. Apr 22, 2012 1:28 PM
Fwd: PLA bulkbuy - Hi all, This is a group buy being set up by one of our members which I thought some of you might like to get in on. Please reply to our list or to Joel directly if you want to get in on this o Lawrence D. Apr 20, 2012 2:58 AM
RE: [gctechspace] Those cisco rack mount units... - On Wed,[masked] at 03:29 -0400, BW~Merlin wrote: > "Fake"/null/sub interfaces are very handy when you want to minimise > the number of physical ports you use ie. doing vlans or throwing bad > routes to etc. Now that you have found this much out wha Ben M. Apr 18, 2012 9:07 PM
Re: [gctechspace] Those cisco rack mount units... - On Wed,[masked] at 05:54 -0400, David Tangye wrote: > Cool... good info to know. > > > Re passwords: "reset the root password to the guessable two char one" > - call me senile, but I cant guess it: ok?, fu? ..? It's an oldie, but a goodie... Ben M. Apr 18, 2012 9:03 PM
RE: [gctechspace] Those cisco rack mount units... - I just make all the passwords the wireless password that wa BW~Merlin Apr 18, 2012 7:57 PM
Re: [gctechspace] Those cisco rack mount units... - Cool... good info to know. Re passwords: "reset the root password to the guessable two char one" - call me senile, but I cant guess it: ok?, fu? ..?  When setting up any common machines and accounts et David T. Apr 18, 2012 7:54 PM
RE: [gctechspace] Those cisco rack mount units... - "Fake"/null/sub interfaces are very handy when you want to BW~Merlin Apr 18, 2012 5:29 PM
Those cisco rack mount units... - I finally got around do playing with that rack mount unit I borrowed. It is running a respin of Fedora Core 4 "cisco clean access" perfigo kernel. 240W - Power on initial "take off" after switching on 150W - around the time the fans churn down a bit Ben M. Apr 18, 2012 4:40 PM
#ozhs on Freenode - Hi all, Lemming from HSBNE here. I've noticed that some of the IRC channels for some of the spaces around Australia are pretty dead, or have very few Lawrence D. Apr 18, 2012 12:05 AM
Re: [gctechspace] Building a group gctechspace rocket? - Another plan might be to aim at two shipments; the first being the rocket kit and the later the remaining parts to complete. Looking at the bill of materials the rocket kit is Ben M. Apr 16, 2012 9:45 AM
Fwd: 4/15 Raspberry Pi - Preview not available Steve D. Apr 16, 2012 7:34 AM
Re: [gctechspace] Building a group gctechspace rocket? - No you can have meetings up front, to nut out purchase etc issues (and fire up the barbie) before you get parts. For anyone starting a project, I recommend that you don't ignore the social aspects, and that you hold informal meeting David T. Apr 16, 2012 12:42 AM
RE: [gctechspace] Building a group gctechspace rocket? - For the maths, I'd recommend a comfy seat and this: http://www.thenile.com.au/book­s/G-Harry-Stine/Handbook-of-Mo­del-Rocketry/9780471472421/ I'm always happy to chat about this too ;) I thought I'd gauge interest before putting it on meetup. Its a chi Ben M. Apr 16, 2012 12:11 AM
RE: [gctechspace] Building a group gctechspace rocket? - Stick it up on the techspace meetup page as a suggested eve BW~Merlin Apr 13, 2012 11:42 PM
Re: [gctechspace] Building a group gctechspace rocket? - Oh, and for those electronics heads, I'm looking to graft a different GPS onto the mobsendat board than the fsa03: http://forum.freetronics.com/v­iewtopic.php?f=9&t=286 About $50 delivered, then the fun of reading it's data from the arduino begins. Ben M. Apr 13, 2012 10:25 PM
Re: [gctechspace] Building a group gctechspace rocket? - That's an awesome Idea, I'd definitely be happy to express interest in the meetup :-) Regards, Lucas On Fri, Apr 13, 2012 at 9:21 PM, Ben Martin < Lucas B. Apr 13, 2012 9:33 PM
Building a group gctechspace rocket? - Hi everybody! You might remember me from such rocket launches as the one many gctechspacers attended. I've been sniffing around the parts list working out the bill of materials for the upcoming rocket for a little while. It occurred to me Ben M. Apr 13, 2012 9:21 PM
Re: [gctechspace] ARMses - The two things that make the Raspberry pi more appealing than all of these worthy contenders is: the $35 price tag, the 8 GPIO pins that would allow it to Vivian C. Apr 13, 2012 4:49 PM
Re: [gctechspace] ARMses - http://liliputing.com/2012/03/­mele-a1000-is-a-70-hackable-li­nux-friendly-arm-based-pc.html­ On Thu, Apr 12, 2012 at 1 Triffid H. Apr 13, 2012 12:46 PM
Re: [gctechspace] The SLUG - There's also an openmoko at the space. Not sure the specs, but if someone wants to try install linux on it we could have portable wifi/gps/webcam/audio device. On Fri, Apr 13, 2012 at 06:33, Gavin Metzler David B Apr 13, 2012 8:34 AM
Re: [gctechspace] The SLUG - Hey I've got an old Dell Axim PDA if anyone wants to try load linux on it. -GAv On Thu, Apr 12, 2012 at 11:22 PM, Ben Martin < [address removed] Gavin M. Apr 13, 2012 6:33 AM
The SLUG - Steve very generously lent me his nslu2 (aka a slug) to play around with http://homesupport.cisco.com/e­n-us/wireless/lbc/nslu2 ARM CPU in the 100s of mhz, 32mb of RAM, nic + 2 usb ports in a box. A bunch of hacks available online to bring out the oth Ben M. Apr 12, 2012 11:22 PM
ARMses - Just thought I'd throw these out there as a grouping of some of the stuff I've been surfing around. Ah... comments provided under the GPL... some things might not be 100% correct since its mostly from memory.. $170 Cubox, very similar CPU to the OLPC Ben M. Apr 12, 2012 11:11 PM
RE: [gctechspace] Rasberry pi - You could always sus out getting some while you are over in BW~Merlin Apr 12, 2012 8:47 PM
Re: [gctechspace] Rasberry pi - I ordered one from each vendor - Farnell did end up charging my card so hopefully one is on the way. There are now some alternative options too - Ben had a few ideas for better specced ARM based units. On Thu, Apr 12, 201 Steve D. Apr 12, 2012 8:45 PM
Re: [gctechspace] April meetup - thanks everyone for coming! - Preview not available David T. Apr 12, 2012 4:38 PM
Re: [gctechspace] Rasberry pi - I registered my interest in both online stores and haven't heard anything back. I think everyone's waiting for the next production batch On Thu, Apr 12, 2012 at 3:06 PM, Vivian Crompton Matthew S. Apr 12, 2012 3:20 PM
Rasberry pi - Any news on where and when we can get our mits on one of these in Australia? Is anyone else in the group thinking of buying one or two to hack around wit Vivian C. Apr 12, 2012 3:06 PM
Re: [gctechspace] KitTen board: DIY FTDI USB/Serial cable - Google for making one out if nokia data cable...  This easiest way.  I also have a usb serial bridge in my box you can have On Apr 12,[masked]:46 PM, "David B" < dtbaker@gmail. Steve D. Apr 12, 2012 2:31 PM
Re: [gctechspace] April meetup - thanks everyone for coming! - Preview not available Steve D. Apr 12, 2012 2:30 PM
KitTen board: DIY FTDI USB/Serial cable - Hello techspacers, Does anybody know how to make these FTDI USB/Serial cables required for the KitTen boards? http://www.freetronics.com/pro­ducts/kitten David B Apr 12, 2012 1:46 PM
April meetup - thanks everyone for coming! - Preview not available David B Apr 12, 2012 10:34 AM
Reprap - bridge print success - Hey all, Good day down here, Jelly at the space.  Left the reprap unattended printing a nice part for the next printer. It has successfully printed a "bridge", picture here: David B Apr 4, 2012 3:49 PM
New Membership Fees Active! - Hi All We recently surveyed you all and it became clear to us that our original membership fee of $100/month for the TechSpace was a little ambitious. We put the idea out there of a $40/month membership fee ($20 for concessions) and a l Steve D. Apr 4, 2012 2:52 PM
Re: [gctechspace] Android HTC phone - rooting - Hey dave, I've done it a bit as I used to import/export android tablets. I think I have a heap of software packages relating aswell, I'll see if I can bring them down. Regards, L Lucas B. Apr 4, 2012 8:19 AM
Re: [gctechspace] planet gc techspace? - I'd be happy to setup the planet software. I'll chat about this possibility next time I'm in & perhaps getting login credentials to make it happen. On Sun,[masked] at 08:18 -0400, Steve Dalton wrote: > Sounds good - I haven't been blogging much r Ben M. Apr 3, 2012 10:29 PM
Re: [gctechspace] Re: Sniffing network traffic from an Android phone - heh this is /why/ I rooted my phone within hours of getting it. well, two reasons: 1) wireless tether with the phone acting as hotspot and 2) being able to connect to other ad-hoc networks. On Tue, Apr Triffid H. Apr 3, 2012 9:58 PM
Re: [gctechspace] Android HTC phone - rooting - I rooted my aria ages ago, just plugged it into usb and pointed unrevoked at it. see xda-developers forums for how to root specific models. as an added bonus it gave me clockworkmod recovery which I later used to install cyanogenmod. Triffid H. Apr 3, 2012 9:57 PM
Android HTC phone - rooting - Anybody have experience rooting an Android HTC or similar? If you're at the tech space tomorrow it would be great if someone could show me how. Cheers, Dave  David B Apr 3, 2012 9:31 PM
Re: Sniffing network traffic from an Android phone - Ah, stock android doesn't support connecting to ad-hoc wifi networks. Will have to connect via the usb cable or something. Reverse tethering. Might leave it til tomorrow at the space. On Tue, Apr 3, 2012 at 21:1 David B Apr 3, 2012 9:28 PM
Re: [gctechspace] Soldering stations arrived - Can you put up a photo and some details if theres any spares. On Tue, Apr 3, 2012 at 5:15 PM, Gavin Metzler < [address removed] > wrote: Lucas B. Apr 3, 2012 5:26 PM
Soldering stations arrived - The Soldering SMD reword stations have arrived. I've received payment from Dave Baker, Clarence Tan and Dylan Lacey. For everyone else who wanted one, please email me directly ( gavinmetzler@gmail. Gavin M. Apr 3, 2012 5:15 PM
Re: [gctechspace] planet gc techspace? - Sounds good - I haven't been blogging much recently but might encourage me to do so. My blog is http://dalts.net - it's just on tumblr. On Sun, Apr 1, 2012 at 4:04 PM, Ben Martin Steve D. Apr 1, 2012 10:18 PM

Our Sponsors

People in this
Meetup are also in:

Sign up

Meetup members, Log in

By clicking "Sign up" or "Sign up using Facebook", you confirm that you accept our Terms of Service & Privacy Policy