Past Meetup

Laser Cutter Level II

This Meetup is past

2 people went

Every 2nd Saturday of the month

Location image of event venue

Details

• What we'll do
If you have taken the intro to the Laser Cutter class at The Gizmo Dojo, then come join us for the Level 2 class! In this class, we will work on learning how to create our own designs from drawings, or from the internet. We will use Inkscape and LaserCAD to modify our images and then bring them to life on the laser!

In addition to editing images, we will also try different materials and see what settings work best with them. Please see below for a list of acceptable materials. For everyone's safety, if you have another material you would like to try, please contact Andy before the class to get approval.

Details:
Teacher: Andy Donaldson
Cost: $18 for members and $20 for non-members
Please prepay at: http://thegizmodojo.com/classes/
When: The second Saturday of every month. 5 - 8 pm.
Prerequisites: Must have experience with The Gizmo Dojo laser cutter from Level 1.
What to Bring: Please bring your laptop with Inkscape downloaded, and any materials you want to use for your project.
DOWNLOAD HERE! ---->https://inkscape.org/en/release/0.92.3/
Acceptable Materials:
- 1/8 inch plywood
- Acrylic plastic sheets
- Glass/ Painted glass (spray paint or acrylic)
- Acrylic Felt
- Natural Cork
- Paper
- Denim/ Cotton ( No blends)
- Other ideas? Please ask first.

• What to bring
Laptop with Inkscape and the material you wish you use in the laser cutter. Please ask for approved list.

• Important to know