addressalign-toparrow-leftarrow-rightbackbellblockcalendarcameraccwcheckchevron-downchevron-leftchevron-rightchevron-small-downchevron-small-leftchevron-small-rightchevron-small-upchevron-upcircle-with-checkcircle-with-crosscircle-with-pluscrossdots-three-verticaleditemptyheartexporteye-with-lineeyefacebookfolderfullheartglobegmailgooglegroupshelp-with-circleimageimagesinstagramlinklocation-pinm-swarmSearchmailmessagesminusmoremuplabelShape 3 + Rectangle 1ShapeoutlookpersonJoin Group on CardStartprice-ribbonShapeShapeShapeShapeImported LayersImported LayersImported Layersshieldstartickettrashtriangle-downtriangle-uptwitteruserwarningyahoo

Printed Circuit Board Design and Robotics with Arduino!

We will be hearing from Gus Issa on the basics of circuit board design using free software and a lifetime of experience.  We will also be working on an Arduino based robotic arm courtesy of Ying Wang!  If you have something that you would like to bring to show the group please do so.  Any technology and design will be welcome.

 

*EDIT* Jim is not able to make it to this meetup with his scoreboard so we moved Ying to center stage.

Join or login to comment.

  • Gary B.

    Hi John, no worries, summer time construction can be a pain. Our next meetup will be July 29th, we look forward to seeing at this meetup.

    June 26, 2013

  • John_TS_DTW

    I am sorry. I attempted to enter the I-696E starting from I-275N Ramp but the detour information were so bad. I attempted 3 times and each time the Entrance Ramp is closed. I found that a longer stretch of I-696E was under repair but I got delayed by over 1 hour with other cars getting bad detour information and decided to go to Techshop to do some work instead.

    June 24, 2013

  • Gary B.

    We would like to thank everyone for coming out and to Gus for his talk on circuit board design and layout.

    June 24, 2013

  • Stephen T.

    very good. very informative. Nice to see others with similar interests and doing similar type of work.

    June 22, 2013

    • Gary B.

      if we can find a Bill of Materials for his project the we can look up the power requirements for his mainboard, etc and from there we could find what solar panels that have the correct power output.

      June 18, 2013

    • Gus I.

      Solar charging is perfect from my motorhome! I know plenty about electronics but very little when it comes to solar power.

      June 21, 2013

  • Gary B.

    Hi Priya, I would say the main part of the meeting a couple of hours. At the last meetup there are a few of us who ended up staying until around 3 or so. It's pretty open ended so if you are under time constraints come on in for as long as you can.

    June 20, 2013

  • Gary B.

    Welcome to the group Rick we look forward to seeing you Saturday.

    June 20, 2013

  • Priya

    Gary, how long do we expect this meetup session to last??

    June 20, 2013

  • Gary B.

    Everyone who is coming please try to vote on the group project before Saturday, the link is

    http://www.meetup.com/Hacker-Space-Detroit/polls/844722/

    June 19, 2013

  • Gary B.

    Welcome to the group Brian, we look forward to seeing you at our next meetup!

    June 19, 2013

  • Gary B.

    We would like to welcome John to the group, we look forward to meeting you at the next meetup.

    June 18, 2013

  • Gary B.

    Welcome to the group Stephen, we look forward to seeing you at the next meetup this weekend.

    June 17, 2013

  • Gary B.

    Good morning everyone, I created a poll for the group to determine our next group project. We have one week until our next meetup so please vote and let the group know what you think!

    http://www.meetup.com/Hacker-Space-Detroit/polls/844722/

    June 14, 2013

  • Gary B.

    We would like to welcome Puneet to the group and we look forward to seeing him at our next meetup.

    June 14, 2013

  • Gary B.

    Good Morning Tom, we would like to welcome you to the group! We look forward to seeing you at our next meetup.

    June 10, 2013

  • Gary B.

    Hi Priya, welcome to the group and we look forward to seeing you at the next meetup! We also have a forum under "Discussions" if you have anything you would like to share.

    May 29, 2013

    • Priya

      Thanks Gary.

      June 8, 2013

  • Gary B.

    http://www.igvc.org/, if you have time this weekend this might of interest to some of you out there. It is this weekend at Oakland University.

    June 5, 2013

  • Gary B.

    We posted a few pictures on the progress of Ying's robotic arm please take a look at them. We would also like to remind everyone about the new forums we created under discussions.

    June 5, 2013

  • Gary B.

    We would like to welcome Girard and Moorthy to the group! We hope that you are able to join us for our next meetup.

    June 5, 2013

  • Priya

    Looking forward to this !

    May 29, 2013

  • Gary B.

    Hi everyone, I created a forum post for Ying's robotic arm. It is open to the public so please feel free to check it out!

    http://www.meetup.com/Hacker-Space-Detroit/messages/boards/thread/34872682#[masked]

    May 27, 2013

  • Gary B.

    Sounds like we have the topic of our July meetup.

    May 27, 2013

  • Gus I.

    I guess the only option is to make our own quadcopter ;-)

    May 27, 2013

  • Gus I.

    Maybe the quadcopter can visit as well Ying ;-)

    May 26, 2013

10 went

Our Sponsors

People in this
Meetup are also in:

Sign up

Meetup members, Log in

By clicking "Sign up" or "Sign up using Facebook", you confirm that you accept our Terms of Service & Privacy Policy