addressalign-toparrow-leftarrow-rightbackbellblockcalendarcameraccwcheckchevron-downchevron-leftchevron-rightchevron-small-downchevron-small-leftchevron-small-rightchevron-small-upchevron-upcircle-with-checkcircle-with-crosscircle-with-pluscrossdots-three-verticaleditemptyheartexporteye-with-lineeyefacebookfolderfullheartglobegmailgooglegroupsimageimagesinstagramlinklocation-pinm-swarmSearchmailmessagesminusmoremuplabelShape 3 + Rectangle 1outlookpersonJoin Group on CardStartprice-ribbonShapeShapeShapeImported LayersImported LayersImported Layersshieldstartickettrashtriangle-downtriangle-uptwitteruseryahoo

Build, Config, and Swap!

  • to
  • Shaw's Supermarket Meeting Room

    570 Shelburne Rd, Burlington, VT 05401, Burlington, VT (map)

    44.449528 -73.206985

  • The meeting room is in the front of Shaw's, on the first floor, on Dollar Tree side. The door is across from isle 2 (in organic/natural foods section).
  • Can't make it for 6PM? Feel free to come late!

    Come to get help, ask questions, or just socialize. Everyone is welcome; even if you don’t have anything yet and are just thinking about planning to buy/build a drone.

    Please feel free to bring your UAS/UAV/Drones/Wings and any parts to trade, sell, get help building/configuring, or just to show off.

    We can’t fly outside at this location or fly anything larger than a Nano inside the meeting room but there is plenty of space/seating and lots of help available for you to build/configure your drones.

    We’ll have some basic tools, a drill, dremel, and a solder station on hand. You're also welcome to bring your own or any specialty tools or parts you might need. 

    Outside food and drinks are not permitted but you're welcome to buy whatever you want in Shaw's and bring it to the meeting room. ALL props MUST be removed from drones larger than a Nano and only Nanos/Micros are permitted to fly within the meeting room.

    NEW: Tiny Whoop! and Nano FPV Building

    The latest thing to take the drone world by storm is the very cool "Tiny Whoop" and other Nano FPV builds or modifications that you can do for as low as $100! These tiny quads are a ton of fun indoors or out! We’ll be planning a lot more events around them throughout the year.

    Get in on the fun by coming to one of our upcoming Build, Config, and Swap meetups. We will have all the necessary tools and support! Just bring your own bag of parts!

    You can find instructions/part lists and more information at:

    • http://teambigwhoop.com/tiny-whoop/

    • http://blog.matthew-evans.info/2016/04/29/blade-inductrix-build-log-parts-list/

    • http://www.thingiverse.com/thing:1532755

    • http://www.thingiverse.com/thing:1585064

    • http://www.instructables.com/id/Micro-105-FPV-Quadcopter-3D-Printed/

    • https://www.youtube.com/watch?v=1E2YvhiVnpc


    Looking forward to meeting you or seeing you again!


Join or login to comment.

Want to go?

Join and RSVP

1 going

  • Steve M.
    Event Host

    Photographer/C­inematographer­, SamsungCameraU­S Imagelogger, DJICreator, VTPhotoTours.c­om... more

People in this
Meetup are also in:

Sign up

Meetup members, Log in

By clicking "Sign up" or "Sign up using Facebook", you confirm that you accept our Terms of Service & Privacy Policy