addressalign-toparrow-leftarrow-rightbackbellblockcalendarcameraccwcheckchevron-downchevron-leftchevron-rightchevron-small-downchevron-small-leftchevron-small-rightchevron-small-upchevron-upcircle-with-checkcircle-with-crosscircle-with-pluscrossdots-three-verticaleditemptyheartexporteye-with-lineeyefacebookfolderfullheartglobegmailgooglegroupshelp-with-circleimageimagesinstagramlinklocation-pinm-swarmSearchmailmessagesminusmoremuplabelShape 3 + Rectangle 1ShapeoutlookpersonJoin Group on CardStartprice-ribbonShapeShapeShapeShapeImported LayersImported LayersImported Layersshieldstartickettrashtriangle-downtriangle-uptwitteruserwarningyahoo

Aquaponics Basics and One Barrel System Construction

  • Jul 20, 2013 · 10:00 AM
  • This location is shown only to members

Audience:

This meeting is open to all and intended for those DIY types that want a basic understanding of how Aquaponics works, an overview of the build steps, and parts list so they can build their own system. These systems can be built into a 55 gallon or 35 gallon Polyethylene barrel

Host: Bob Jordan

Overview:


1. Overview of, how an Aquaponic system works, plumbing, media, plants, fish, and Nitrogen Start-up cycle will be given.
a. Elements of an Aquaponics system
b. How the plumbing works
c. What media to use and why
d. What plants are recommended
e. What is the Nitrogen (Start-up Cycle), why do I care, and how do I do it?
f. Testing: Ammonia, Nitrite, Nitrate, Temperature, and pH.
g. Water conditioning


2. Simple Step by Step Instructions for building a one barrel Aquaponics System and overview of how each system element works will be shown
a. The parts used to build the system
b. Where to cut the barrel and how to assemble it.
c. How and where to drill the holes for drain, water inlet, pump power cord, and Fish Tank access Oval hole.
d. Plumbing overview:
i. Drain/overflow installation and assembly
ii. Pump and water inlet installation and connection.
iii. Bulkhead substitutes and tricks
e. Final Assembly

Show-And-Tell:
We have a fully operational One Barrel Aquaponics system that you can inspect. It has been growing herbs for 90 days. Also we will have all the parts to assemble another system, so you can see the parts and before, and fit or placement after they go together.

Take Away Info: URLs to Parts List and step-by-step build instructions will be provided at the meeting.

System pictures here:
http://aquaponicfun.com/step-by-step/how-do-i-get-started-in-aquaponics/

http://aquaponicfun.com/general/one-barrel-aquaponics-system/

Info about more meetings:

http://www.meetup.com/Aquaponic-Fun-Dallas/

.=====================

Free: Startup Cycle Data Tracking Table
http://www.meetup.com/Aquaponic-Fun-Dallas/

Aquaponic Classes

1/ AP Introduction Class
2a/ One barrel Aquaponics system build or
2b/ One IBC Tote Aquaponics system build
3/ Advanced AP class
4/ Introduction to Commercial (Available late July)
5/ Commercial Aquaponic System Design (Available in August)

Prerequisites

We have designed our classes so you benefit the most from them by taking them in order. It maximizes your and our time and your leaning experience
You are welcome to omit either of the build classes 2a or 2b but, please:
Take 1/ Intro before 3/ Advance
Take 3/ Advanced before 4/ Intro to Commercial
Take 4/ Intro to Commercial before 5/ Commercial Design

Supplies:

Kits

Barrel kits will be available at all but the Commercial classes. You can come to an introduction to Aquaponics or one of the “build” class and leave with a kit ready to assemble, just add the pump, controls of your choice, and some fish, to have a system ready to grow

Barrels

55 gallon plastic barrels are available for $25 each. You may be able to find them cheaper but make sure they are food grade. Some of our barrels do not have the 2 plugs with them, which you will need to build the One Barrel Aquaponic System. You will not need the plugs if you build a Travis Hugley Barrel-ponics system.

Liner

Raft way liner is available for $1/sq ft and comes in 12’ minimum width. So the minimum quantity is 12’x1’ for $12. Just tell us how long a piece you need.

Availability

Supplies are available at most meetings.
Email us if you would like to make sure we will have what you want and tell us which meeting you will attend to pick up your supplies.

Join or login to comment.

  • Bernie Van R.

    Sorry, I will not be able to attend. I just found out I have a family commitment on Saturday. Looking forward to meeting all of you next meeting.

    July 19, 2013

  • Tom W.

    Wife, Kayla will attend with me.

    July 14, 2013

  • Tyger

    maybe

    July 11, 2013

14 went

Your organizer's refund policy for Aquaponics Basics and One Barrel System Construction

Refunds are not offered for this Meetup.

People in this
Meetup are also in:

Sign up

Meetup members, Log in

By clicking "Sign up" or "Sign up using Facebook", you confirm that you accept our Terms of Service & Privacy Policy