addressalign-toparrow-leftarrow-rightbackbellblockcalendarcameraccwcheckchevron-downchevron-leftchevron-rightchevron-small-downchevron-small-leftchevron-small-rightchevron-small-upchevron-upcircle-with-checkcircle-with-crosscircle-with-pluscrossdots-three-verticaleditemptyheartexporteye-with-lineeyefacebookfolderfullheartglobegmailgooglegroupshelp-with-circleimageimagesinstagramlinklocation-pinm-swarmSearchmailmessagesminusmoremuplabelShape 3 + Rectangle 1ShapeoutlookpersonJoin Group on CardStartprice-ribbonShapeShapeShapeShapeImported LayersImported LayersImported Layersshieldstartickettrashtriangle-downtriangle-uptwitteruserwarningyahoo

Re: [gctechspace] Fwd: monthly 3D printing interest group

From: Mark V.
Sent on: Monday, November 26, 2012 3:52 PM
Hit send before finishing. 

Only so much time, but now with the RFID access again, the limited time we all have, can be devoted to getting the space and the printers setup. 
Ie I hope to get to the space a couple of nights, to work on the 3D printers. 

Finding the tools to finish the hardware side, and the SS rod, is the hard part just at the moment. 

It is getting better every time I get there, as we get benches setup etc. 

I will be there again Wednesday night, for some work on Vader, which only needs the bed, and calibration to get underway. 

Mark V

Sent from my iPhone

On 26/11/2012, at 15:43, Mark Voevodin <[address removed]> wrote:

Steve,

Other priorities were Door, Internet and setup of space. Then we can come back to the printers. 
Only so much time in the day, for all of us. 

Sent from my iPhone

On 26/11/2012, at 14:47, Steve Dalton <[address removed]> wrote:

3D Printing hitting mainstream on the Goldie now.

We should really get our other 2 printers finished - anyone up for a final push? It's such a waste them just sitting there....


---------- Forwarded message ----------
From: <[address removed]>
Date: Mon, Nov 26, 2012 at 2:09 PM
Subject: monthly 3D printing interest group
To: [address removed]


Hi Steve


Do you could share this information with Gold Coast friends?

Best regards

Jorge

---

NMp_Pr[masked]:

3D Printing Interest group talk forum.

"New Materiality: digital hard plasticity project” will launch a monthly
3D printing interest group.  Meeting will be on the first Thursday of each
month at 6:30pm at PaperLightBoxStudio, within Rabbit+Cocoon as part of
the precincts upLATE program. The opening demonstration and discussion
will be Thursday 6 December.

The first invited speaker is Daniel Flood, Who will bring a 3D Printer to
run a demonstration and present the state's first 3D printing lab to be
established at The Edge, in the State Library of Queensland. The
presentation will precede an open conversation.

In the spirit of the Edge’s 3D printing Lab, and in collaboration with
Gold Coast Techspace, education and industrial institutions, The New
Materiality project aims to set up a 3D Printing Hub at Miami’s
Rabbit+Cocoon Arts Precinct.

3D Printing is part of the extended Digital Direct Manufacturing (DDM),
more specifically of the additive manufacturing technology and has begun
to deeply transform all industries and will especially impact near future
manufacturing processes and working relations. In the context of the
global digital economy, the New Materiality project instigates a local
open discussion by asking the community, what is there for us? The project
strives to work locally with the cities makers and thinkers to own and
understand our future interaction with the technology.

Anyone with an interest or intrigue in 3D Print technology is invited to
attend the 6:30pm talk forum Thursday 6 December at studio 3, Paper Light
Box Studios Rabbit+Cocoon 23 Hillcrest Pde, Miami Gold Coast.  Please RSVP
by email at:  [address removed]



The 3D Printing Hub @ R+C will provide a social resource for the creative
community to explore, experiment and play with this technology.  The
Vision of the “New Materiality project” is to help build community
capacity to prepare the artisans to understand, work and create with the
tools that will inevitably shape the 21st century.  The question to be
asked is, unlike many technologies misunderstood from the last Industrial
Revolution, can we understand how to harness the potentiality of 3d
printing technologies to assist in creating sustainable communities in
local hubs?


Jorge Cantellano has previously worked within the Gold Coast and Brisbane
marine industry, supporting boat-builders with computer generated 3D
visualisation and CAD/CAM. Jorge is the initiator and committed
coordinator of the “New Materiality: Digital Hard Plasticity Project” with
a mission to establish a 3D Printing community hub on the Gold Coast.
This is a platform of practical and philosophical understanding of the
technology and explores avenues for social enterprise, community and
cultural development ventures.

If you are inspired to work creatively with the new additive manufacturing
technology you could submit your expression of interest to be a partisan
of the creative experimental artisan group working with 3DPrinting
technology. Please submit your interest by email to:
[address removed]


“We are the people who already work with digital 3D modelling,
visualisation, CAD/CAM, CAD/DDM/ and we create forms using the computer to
mediate fabrication. We already are, like it or not, contributing to a CAD
formed future. Let’s exercise our capacity to use the technology to create
better communities by transferring our knowledge to grass roots
fabricators. Let’s empower the community to make decisions about where,
and why the technology can create a better future in their localities.”
Jorge Cantellano


Jorge Cantellano
New Materiality: digital hard plasticity project
Project Coordinator

Rabbit + Cocoon Arts Precinct
3/ 23 Hillcrest Pde, Miami
Gold Coast, QLD 4220
[address removed]
M: [masked]

Layer by Layer a 3D printer deposit a series of successive thin material
until a solid object emerges.





--
Steve Dalton, President & Co-Founder
Gold Coast Tech Space
Shop 4, 21 Nind St, Southport, Q 4215
+61 [masked]





--
Please Note: If you hit "REPLY", your message will be sent to everyone on this mailing list ([address removed])
This message was sent by Steve Dalton ([address removed]) from Gold Coast Techspace.
To learn more about Steve Dalton, visit his/her member profile
Set my mailing list to email me As they are sent | In one daily email | Don't send me mailing list messages

Meetup, PO Box 4668 #37895 New York, New York[masked] | [address removed]
<Layer by Layer a 3D printer.JPG>




--
Please Note: If you hit "REPLY", your message will be sent to everyone on this mailing list ([address removed])
This message was sent by Mark Voevodin ([address removed]) from Gold Coast Techspace.
To learn more about Mark Voevodin, visit his/her member profile
Set my mailing list to email me As they are sent | In one daily email | Don't send me mailing list messages

Meetup, PO Box 4668 #37895 New York, New York[masked] | [address removed]

Our Sponsors

People in this
Meetup are also in:

Sign up

Meetup members, Log in

By clicking "Sign up" or "Sign up using Facebook", you confirm that you accept our Terms of Service & Privacy Policy