Makers

Pojďme se pravidelně potkávat a sdílet zkušenosti z Power Platformy, co nás na ní baví, co nás trápí a co nového zajímavého přichází. A pokud už nám to někde reálně běží, pochlubme se, jak to funguje nebo nefunguje. Témata jsou primárně Power Automate, Power Apps, Power Pages, Power BI, Copilot Studio, Dynamics 365 a Dataverse. Budeme rádi i za méně pokročilé příspěvky, protože většinou jsme velmi hluboko v technických detailech. **Lokalita:** Fyzicky v Microsoftu v Praze Vyskočilova 1561/4a, Praha 4, 140 00 Místnost Morava Případně online na [https://ppug.community/stream](https://ppug.community/stream) **Jazyk:** čeština **Agenda:** [https://ppug.community/agenda](https://ppug.community/agenda) **Přihlašte vlastní příspěvek:** [https://ppug.community/sessions](https://ppug.community/sessions) **Link na stream:** [https://ppug.community/stream](https://ppug.community/stream) **Občerstvení:** Bagety **Úroveň:** 100-300 Tak si prosím naplánujte čas ve svých kalendářích a přijďte, pokud bude chuť a čas, tak si po meetupu určitě můžeme sednout na pivo.

This time, the event will also include a **competition** and the **announcement of its results**. The description can be found below. For more information about the competition, please click **[HERE](https://deepscout-challenge.miton.cz/).** Web scraping is no longer just about simple scripts. Modern websites are complex, dynamic, and protected by many anti-scraping systems. At the same time, companies need large amounts of structured data from the web. In this event, we will focus on a real scraping use case and use it to explain how modern scraping works. You will learn what kinds of protections websites use today, what tools can be used depending on website difficulty, and what technical challenges appear in practice. We will also show how machine learning and AI help turn messy web data into structured, usable information. \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- ⌚️ **Start**: 16:00 and end at 17:00, both online and offline in **Truhlárna Karlín** (Šaldova 388/5) - **Onsite attendance is limited to 100 people.** 🎙️ **Speakers:** Jan Mittner, Michal Marhan 🍻 **Networking** after the seminar – great food and cold beer waiting for you! **🎥 Recording:** After the event we will publish a recording and post a link to it in the comments. 🚪**Doors open** at 15:45, and the event officially starts at 16:00. Your expertise is about to take off. Can't wait to have you on board! \-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\- **Who is hosting the event** **GLAMI** is a leading European fashion discovery platform active in 14 countries. It brings 500,000 orders monthly to the 4,000+ shops listed. [GLAMI](https://glami.group/) has an in-house team of 10+ AI researchers and developers. Machine learning models handle the entire personalization and catalog ranking process, manage bidding in marketing tools, and take care of content management and categorization. [Tonda Hoskovec](https://www.linkedin.com/in/antonin-hoskovec-52b611a0/), CAIO at GLAMI, is the main organizer of Miton AI Times. **Miton** is a Czech VC with portfolio companies like Rossum, Equilibre, or Rohlik. Apart from supporting Miton AI Times, Miton also issues the bi-weekly [AI Newsletter](https://mitonainewsletter.substack.com/). [Read more about Miton and AI](https://www.miton.cz/en/ai/)

**Tatry AI Community #2: Claude code: setup, tips and tricks** Pokračujeme v novej AI komunite popri Tatry IT! AI sa vyvíja tak rýchlo, že sledovať všetko sám je nemožné. Preto sme sa rozhodli stretávať sa pravidelne a zdieľať, čo funguje, čo nie a čo sa oplatí vyskúšať. **Čo nás čaká:** 🎯 **Téma: Claude code: setup, tips and tricks** Pozrieme sa na základný setup Claude code, niečo si o ňom povieme, ale hlavne si prezradíme rôzne tipy a triky, ktoré nám pomáhajú pri každodenných úlohách. Žiadne "slajdy", žiadna príprava — stačí otvoriť notebook a ukázať. Ak ešte Claude code nepoužívaš, nevadí — príď sa inšpirovať. 📋 **Program**: • Intro — kto si a čo robíš ak sa ešte nepoznáme (10 min) • "**Claude code: setup, tips and tricks** — ukážky a diskusia (40-50 min) • Organizačné — dohodneme formát a témy na ďalšie stretká (15 min) • Voľná diskusia a networking 🍺 👥 Pre koho to je: Pre každého, kto AI používa v práci alebo sa chce naučiť - developeri, DevOps, projekťáci, dizajnéri, jednoducho ktokoľvek z IT kto je zvedavý. Nič nemusíš vedieť dopredu. Stačí prísť. Zaregistruj sa [tu](https://docs.google.com/forms/d/e/1FAIpQLSfxsBr9EORchYFwHVGKtqsjaXpCfDrGqSPpokqAnTETei3NbA/viewform?usp=publish-editor). Zaujíma Ťa niečo konkrétne, alebo máš zaujímavú tému? Napíš nám ([community@tatryit.sk](mailto:community@tatryit.sk)). Tatry IT Team Eventy organizujeme v spolupráci s [Coworking Poprad](https://coworkingpoprad.sk/).

Bring your Raspberry Pi, Arduino, microcontroller, or any other electronic project and join fellow electronics makers for a night of creativity and collaboration! This session is open forum to share your current projects—whether complete or in progress, it’s all interesting! Whether you’re deep into embedded systems, exploring new ideas, or just getting started, you’ll find a welcoming space to collaborate, share, and get inspired. **New to electronics or curious about tinkering?** You’re absolutely welcome. If you’re a beginner and want to experiment, I’ll have a couple of starter kits available so you can try things out—whether that’s blinking your first LED, putting something on a display, or experimenting with simple sensors. No pressure and no experience required—just an interest in learning and building. While we continue to pursue a more permanent venue for this Meetup, we’ll be using public library facilities based on availability. This session will be at the Worthington Park Library in the Olentangy Meeting Room.

Bring your Raspberry Pi, Arduino, microcontroller, or any other electronic project and join fellow electronics makers for a night of creativity and collaboration! This session is open forum to share your current projects—whether complete or in progress, it’s all interesting! Whether you’re deep into embedded systems, exploring new ideas, or just getting started, you’ll find a welcoming space to collaborate, share, and get inspired. **New to electronics or curious about tinkering?** You’re absolutely welcome. If you’re a beginner and want to experiment, I’ll have a couple of starter kits available so you can try things out—whether that’s blinking your first LED, putting something on a display, or experimenting with simple sensors. No pressure and no experience required—just an interest in learning and building. While we continue to pursue a more permanent venue for this Meetup, we’ll be using public library facilities based on availability. This session will be at the Worthington Park Library in the Olentangy Meeting Room.

Bring your Raspberry Pi, Arduino, microcontroller, or any other electronic project and join fellow electronics makers for a night of creativity and collaboration! This session is open forum to share your current projects—whether complete or in progress, it’s all interesting! Whether you’re deep into embedded systems, exploring new ideas, or just getting started, you’ll find a welcoming space to collaborate, share, and get inspired. **New to electronics or curious about tinkering?** You’re absolutely welcome. If you’re a beginner and want to experiment, I’ll have a couple of starter kits available so you can try things out—whether that’s blinking your first LED, putting something on a display, or experimenting with simple sensors. No pressure and no experience required—just an interest in learning and building. While we continue to pursue a more permanent venue for this Meetup, we’ll be using public library facilities based on availability. This session will be at the Worthington Park Library in the Olentangy Meeting Room.

**SPECIAL PROMOTION**: Buy 3 and get 1 Free! (5 oz glass jars only) Looking for a creative night out that isn’t boring or corporate? Come hang out at **The Arcane Foundry** for an open candle bar and a 3D print paint and sip! Choose something from our 3D-printed shelf — *think ceramic paint-and-sip, but way cooler and with custom models we print in-house.* Or head to the candle bar and pick your fragrances to pour your own **pillar candle or container candle**. Sip complimentary tea, enjoy bakery snacks, and **BYOB wine or beer** while you paint, pour, and make whatever the hell you feel like making. No experience needed — this is all vibes, fun, and meeting new people while creating something you’ll actually want to take home. **Candle Making** (includes vessel, your choice of wick, wax, scented oil, labels and lids) 5oz Glass Jars $15 8oz Candle Tins $25 12oz Glass Candles $35 12oz Amber Jars $40 16 oz Skull or Jack o Lantern Candle Mugs $65 (Limited Edition!) \[www\.thearcanefoundry\.com\]\(The Arcane Foundry\) **All materials included. You just bring yourself (and your drink of choice).** **Payments accepted:** * Credit Card * Venmo: @Daclaud-Lee * Cashapp: $DaclaudL

Central Ohio Radio Enthusiasts—CORE—is an informal community for anyone enthusiastic or curious about radio—whether you're new to radio and want to learn or you've been tinkering for years and want to share. Ham radio operators, GMRS users, Meshtastic fans, software-defined radio nerds, makers, and technical and non-technical folks are all welcome. No experience required or expected. This month we have **WiFi HaLow: Introduction and Practical Use** with **Alex Barbur**. Details are are [core.radio](https://core.radio).

Pay attention! We’re delaying a week for those of you who may be on Spring break and/or celebrating the holiday. Ok, no pancakes, but waffles-a-plenty. Join the local UX and Digital Design community for a casual monthly breakfast. Look for us upstairs!

It’s time to take control of your mental health. How do you get rid of stress, anxiety and uncertainty? These emotions are buried deep in your reactive mind. Find out what the reactive mind is, and in the process find yourself. Have you ever suffered from a traumatic experience, a deep loss or been through a painful breakup? Has your ability to communicate suffered as a result? And after that, even though you "moved on" did you find that things were never quite the same? Have you ever looked at childhood photos, or reminisced your early life and wondered where that happiness and spark went? Are your emotions out of your own control? Have you ever felt, even if you aren’t aware of it, that possibly you are getting in your own way of your happiness and success? How does this affect your self-confidence? Find out what is at the root of all stress, anxiety, depression and self-doubt. Find out how and why you hold yourself back from achieving your goals and having the life you have dreamed of. As soon as you learn what is at the root of these unwanted conditions, you’ll see it is something you can DO something about. You will not be labeled or categorized at this MeetUp.