I don't normally post no pay jobs - but the first one - acting in a short - and the second directing one -  looks fun and might interest some folks. The others are paid. Please note the reply email address are just before each listing. These are not jobs I'm hiring for - I just found them on Craigslist and they looked legit. Please do not reply to this email but find the appropriate reply email on top of each listing. Good luck! :)Tammy

Reply [address removed] ^[?] 

 Looking for Actors! (Ahwatukee)

Hello
We are a fun group of professionals, who are putting together a crew for a film short to be submitted to film festivals. If you like to act, want to have some fun in a clean cut film, we would love you to join us! Looking for extras, and two gals from 18-30 for two parts. There are limited parts so we are taking auditions now. If you would like to do this as a hobby, want something for your portfolio, or even want to give acting a shot, please send us an email. No DRUGS, no nudity, we have a clean script and are only looking for people who would like to give it a shot.
COme join us on Sunday!
Thank You!

·         Location: Ahwatukee

·         it's NOT ok to contact this poster with services or other commercial interests

·         Compensation: no pay

Posting ID:[masked]

Posted: [masked], 1:25PM MST

Updated: [masked], 8:14PM MST

Reply [address removed] 

 Director's Contest: Direct a Full Length Feature Film (Billings, MT)

We are looking for a person to direct/produce a movie trailer and direct a full-length horror film. Interested directors can compete by first submitting a bio and links to samples of their work. Ten entrants will then be chosen and asked to produce a 30-45 second trailer (all trailers will be shown on our websites). A winner will be chosen and their trailer used for crowd-funding promotion. They may also be presented with a contract offer to direct the feature film in Billings, Montana (airfare and lodging included, if needed). Details are available at our FB pages:

https://www.facebook.com/pages/The-Writers-Ghost/428633980587715

https://www.facebook.com/pages/P210-Productions/344200255724410

·         Location: Billings, MT

·         it's NOT ok to contact this poster with services or other commercial interests

·         Compensation: Trailer winner receives credit and fame and may receive directing contract offer

Posting ID:[masked]

Posted: [masked], 10:35AM MST

Reply [address removed] ^[?] 

 Sound Guy for TV Presentation (Phoenix)

Great opportunity for experienced location sound recordist, for a presentation being produced by Calico Works for Spike TV. Candidate will need own gear, including 4 wireless mics for a cast of 4 family members. Please only submit with resume/credits. If all goes well, we can discuss long term employment if show goes to series. Thank you.

·         Location: Phoenix

·         it's NOT ok to contact this poster with services or other commercial interests

·         Compensation: TBE

Posting ID:[masked]

Posted: [masked], 10:13PM MST

Reply [address removed] ^[?] 

 DSLR Cinematographer / Videographer with own equipment (Phoenix, AZ)

Leading Internet video marketing agency is looking for a talented videographer/cinematographer to capture high definition footage of the Phoenix, AZ community. This is a contract position that could lead to more work for the right candidate. Below is a list of requirements and instructions for responding to this opportunity. 

Equipment Requirements:
• Canon DSLR Camera (60d or better)
• Fast Lenses (f 2.8 or better): Wide Angle, 50mm, and Zoom Lens
• Pocket Dolly / Slider
• Fluid head tripod / monopod

Instructions for responding to this post:
• If you are such a great cinematographer, prove it! Send us the best samples of your work
• Write a brief paragraph introducing yourself and tell us what separates you from the thousands of videographers trying to do the same thing as you
• Tell us about your experience in professional video production

NOTE: We will only contact those who meet all of the requirements and follow the responding instructions in its entirety. Serious inquires only!

·         Location: Phoenix, AZ

·         it's NOT ok to contact this poster with services or other commercial interests

·         Compensation: Industry Day Rate for the Project

Posting ID:[masked]

Posted: [masked], 1:00PM MST

Reply [address removed] ^[?] 

 Build Special Platform For Magician (welding experience a must) (Mesa, AZ)

I'm looking for someone who would be interested in building a special platform that would use a linear actuator to accomplish the illusion of levitating an assistant.

The illusion would look something like this:
http://www.youtube.com/watch?v=FtOoVsTEXPg

Basically there is a secret linear actuator hidden inside of the steps that raises up behind the magician and has an arm that goes around the magician and supports the assistant. Look at the photos for more details. Feel free to ask me about anything you're uncertain about. I will also need a hoop to be built. 3 feet or more in diameter. You can just use a 10ft piece of 1/2" conduit and bend it into a hoop and weld the ends together.

I have already bought the linear actuator here:
http://www.dcactuators.com/Detail.asp?Product_ID=306.230_6124C
As well as a battery and remote. It works perfectly. Now I just need the platform, steps, the secret levitation arm the assistant will be resting upon, and a hoop to be built. Mostly just a bunch of metal work. Following are all of the materials needed and the estimates for how much everything would cost. I have a budget of $500, so after all of the materials the compensation for you labor would be around $250. 

Materials:
Metal price estimates are from http://www.discountsteel.com. Hopefully we can find a local metal shop with comparable prices to avoid shipping costs.
700"x1"x1"x1/16" Aluminum Tubing - $80 (Platform Framing, Platform Legs, Steps) 
60"x2.5"x2.5"x1/8" (thinnest you can find) Aluminum Tubing - $35 (Steps Legs)
3'x3' Aluminum Sheet - $25 (Steps Box)
150"x3/4"x3/4"x1/16" Aluminum Angle Bar - $15 (Platform Framing)
24"x48"x1/2" MDF Board - $10 (Platform Board, Secret Levitation Board)
36" x 1" x 1" 11 gauge Steel Tubing - $10 (Secret Levitation Arm)
Bolts & Nuts - $10
6" x 1 3/4" x 1 3/4" 11 gauge Steel Tubing - $6 (Secret Levitation Arm Connector To Actuator Tip)
1/2"x10' conduit pipe - $2 (Hoop)
Total + Tax = Less than $250

Parts:
These are approximate measurements which will require a bit of fine tuning.

Steps:
Legs -
(1) 27"x2.5"x2.5"x1/8" Aluminum Tube. This leg is welded to the top of the box. A 1.5" tall section of the top outside of this leg should be cut out to make way for the secret levitation arm.
(1) 33"x2.5"x2.5"x1/8" Aluminum Tube. This leg goes straight through the box.
Steps -
(3) 7"x1"x1"x1/16" Aluminum Tube
Box -
(1) 6" tall x 12" wide x 7" deep box made from Aluminum Sheet. No bottom so that secret contents can be loaded and unloaded. But has bottom lips so that another aluminum sheet can be slid in to secure the contents. 
(1) 12"x7" Aluminum sheet

Platform:
Front/Back Panel -
(6) 10"x1"x1"x1/16" Aluminum Tube
(4) 46"x1"x1"x1/16" Aluminum Tube
(2) 46"x3/4"x3/4"x1/16" Aluminum Angle
Left/Right Panel -
(6) 10"x1"x1"x1/16" Aluminum Tube
(4) 22"x1"x1"x1/16" Aluminum Tube
(2) 22"x3/4"x3/4"x1/16" Aluminum Angle
Board-
(1) 24"x48"x1/2" MDF Board
Legs -
(4)33"x1"x1"x1/16" Aluminum Tube

Secret Levitation Board:
Secret Arm -
(1) 1 1/2" x 1 3/4" x 1 3/4" 11 gauge Steel Tube
(1) 17"x1"x1" 11 gauge Steel Tube bent into a semi-circle (or you can just weld a U shape if that'd be easier than bending)
(1) 8"x1"x1" 11 gauge Steel Tube
(1) 6"x1"x1" 11 gauge Steel Tube
Secret Board
(1) 12"x12" MDF

Hoop:
(1) 1/2"x10' conduit pipe bent into circle

·         Location: Mesa, AZ

·         it's NOT ok to contact this poster with services or other commercial interests

·         Compensation: Around $250 for your labor

Posting ID:[masked]

Posted: [masked], 8:26PM MST

Updated: [masked], 6:47PM MST