• Gold Coast Techspace Open Night Tour

    Location visible to members

    Tour of our community workshop where people of all ages & experiences can come together to access tools, equipment, share knowledge & learn!

    Please book at https://www.eventbrite.com.au/e/gctechspace-open-night-tour-tickets-157777914991

    Gold Coast Techspace is a community-based workshop where people of all ages and experience can come together to access tools, equipment and knowledge they may not be able to access anywhere else. We exist to promote craftiness and creativity on the Gold Coast using modern technology such as 3D printers, Arduino boards, and computer-controlled laser cutters; and that's just what we have for now!

    If you want to design, build, create or try new ideas in an inclusive environment then this is the place for you.

    Please visit https://gctechspace.org for more details.

    This tour starts at 7:30pm, please arrive at least 5 mins early to meet the member conducting the tour.

    There is loads of parking behind the building, just walk up the ramp you drove past to get in.

  • KidHack: Electronics, Repair, Repurpose

    Needs a location

    The session running every 2 weeks
    $15 entry (cash only)- RSVP essential

    This is generally self-paced but TechSpace mentors will be around to help you with any problems you might have.
    For first timers - bring broken toys for repair
    Can also disassemble electrical/electronic devices (laptops/printers etc) and repurpose parts for other projects

    Learn how to use tools
    Learn how to solder - electronic kits available to complete and take away
    Learn basic electronics
    Learn how to repair most devices

    We have a number of projects that are made from mainly recycled parts
    Typically there is always take something away at the end of each session

  • KidHack: Electronics, Repair, Repurpose

    Needs a location

    The session running every 2 weeks
    $15 entry (cash only)- RSVP essential

    This is generally self-paced but TechSpace mentors will be around to help you with any problems you might have.
    For first timers - bring broken toys for repair
    Can also disassemble electrical/electronic devices (laptops/printers etc) and repurpose parts for other projects

    Learn how to use tools
    Learn how to solder - electronic kits available to complete and take away
    Learn basic electronics
    Learn how to repair most devices

    We have a number of projects that are made from mainly recycled parts
    Typically there is always take something away at the end of each session

  • KidHack: Electronics, Repair, Repurpose

    Needs a location

    The session running every 2 weeks
    $15 entry (cash only)- RSVP essential

    This is generally self-paced but TechSpace mentors will be around to help you with any problems you might have.
    For first timers - bring broken toys for repair
    Can also disassemble electrical/electronic devices (laptops/printers etc) and repurpose parts for other projects

    Learn how to use tools
    Learn how to solder - electronic kits available to complete and take away
    Learn basic electronics
    Learn how to repair most devices

    We have a number of projects that are made from mainly recycled parts
    Typically there is always take something away at the end of each session

  • Gold Coast Techspace Open Night Tour

    Location visible to members

    Tour of our community workshop where people of all ages & experiences can come together to access tools, equipment, share knowledge & learn!

    Please book at https://www.eventbrite.com.au/e/gctechspace-open-night-tour-tickets-157777914991

    Gold Coast Techspace is a community-based workshop where people of all ages and experience can come together to access tools, equipment and knowledge they may not be able to access anywhere else. We exist to promote craftiness and creativity on the Gold Coast using modern technology such as 3D printers, Arduino boards, and computer-controlled laser cutters; and that's just what we have for now!

    If you want to design, build, create or try new ideas in an inclusive environment then this is the place for you.

    Please visit https://gctechspace.org for more details.

    This tour starts at 7:30pm, please arrive at least 5 mins early to meet the member conducting the tour.

    There is loads of parking behind the building, just walk up the ramp you drove past to get in.

  • KidHack: Electronics, Repair, Repurpose

    Needs a location

    The session running every 2 weeks
    $15 entry (cash only)- RSVP essential

    This is generally self-paced but TechSpace mentors will be around to help you with any problems you might have.
    For first timers - bring broken toys for repair
    Can also disassemble electrical/electronic devices (laptops/printers etc) and repurpose parts for other projects

    Learn how to use tools
    Learn how to solder - electronic kits available to complete and take away
    Learn basic electronics
    Learn how to repair most devices

    We have a number of projects that are made from mainly recycled parts
    Typically there is always take something away at the end of each session

  • KidHack: Electronics, Repair, Repurpose

    Needs a location

    The session running every 2 weeks
    $15 entry (cash only)- RSVP essential

    This is generally self-paced but TechSpace mentors will be around to help you with any problems you might have.
    For first timers - bring broken toys for repair
    Can also disassemble electrical/electronic devices (laptops/printers etc) and repurpose parts for other projects

    Learn how to use tools
    Learn how to solder - electronic kits available to complete and take away
    Learn basic electronics
    Learn how to repair most devices

    We have a number of projects that are made from mainly recycled parts
    Typically there is always take something away at the end of each session

  • Gold Coast Techspace Open Night Tour

    Location visible to members

    Tour of our community workshop where people of all ages & experiences can come together to access tools, equipment, share knowledge & learn!

    Please book at https://www.eventbrite.com.au/e/gctechspace-open-night-tour-tickets-157777914991

    Gold Coast Techspace is a community-based workshop where people of all ages and experience can come together to access tools, equipment and knowledge they may not be able to access anywhere else. We exist to promote craftiness and creativity on the Gold Coast using modern technology such as 3D printers, Arduino boards, and computer-controlled laser cutters; and that's just what we have for now!

    If you want to design, build, create or try new ideas in an inclusive environment then this is the place for you.

    Please visit https://gctechspace.org for more details.

    This tour starts at 7:30pm, please arrive at least 5 mins early to meet the member conducting the tour.

    There is loads of parking behind the building, just walk up the ramp you drove past to get in.

  • KidHack: Electronics, Repair, Repurpose

    Needs a location

    The session running every 2 weeks
    $15 entry (cash only)- RSVP essential

    This is generally self-paced but TechSpace mentors will be around to help you with any problems you might have.
    For first timers - bring broken toys for repair
    Can also disassemble electrical/electronic devices (laptops/printers etc) and repurpose parts for other projects

    Learn how to use tools
    Learn how to solder - electronic kits available to complete and take away
    Learn basic electronics
    Learn how to repair most devices

    We have a number of projects that are made from mainly recycled parts
    Typically there is always take something away at the end of each session

  • KidHack: Electronics, Repair, Repurpose

    Needs a location

    The session running every 2 weeks
    $15 entry (cash only)- RSVP essential

    This is generally self-paced but TechSpace mentors will be around to help you with any problems you might have.
    For first timers - bring broken toys for repair
    Can also disassemble electrical/electronic devices (laptops/printers etc) and repurpose parts for other projects

    Learn how to use tools
    Learn how to solder - electronic kits available to complete and take away
    Learn basic electronics
    Learn how to repair most devices

    We have a number of projects that are made from mainly recycled parts
    Typically there is always take something away at the end of each session