• Do-It-Yourself Labs & AstroPlant kickoff

    Amsterdam Public Library (OBA)

    Every first Wednesday of the month we have a non-organized meetup were OBA sponsors us with their location. During this evening you can start learning to work with Arduino, Microbit or work on a prototype to 3Dprint etc. Note that we don't provide a course, it is all about DIY, but you can also collaborate on mutual projects or find people to join your own projects! This evening we will start our participation in the Astroplant project; https://www.sensemakersams.org/astro-plant/ We start at 18:00 and end the evening around 21:00. There are 3Dprinters, lasercutters, tools and enough outlets available! So just bring your laptop & ideas and lets get going! For people starting, it might take the first evening just to get an Arduino working, but then we have sets to work/learn on: - Building your own solar powered WiFi Weather Station, use the 3D printer to make your own weatherhouse-design;-) https://www.instructables.com/id/Solar-Powered-WiFi-Weather-Station-V20/ - Unode Lora Board so that you have access to The Things Network, a free open network and can build your (next) IoT application at low cost, featuring maximum security and ready to scale. https://www.thethingsnetwork.org/labs/story/first-ttn-and-allthingstalk-application-using-tlabgrs-unode-lora-board But you can also start your own, for ideas & materials you can also check: https://www.sensemakersams.org/internet-of-things-sensemakers-amsterdam/projects-diy/ There is a cafe on the split level on the ground floor and a restaurant on the 7th, but please note that food & drinks are not allowed in the makerspace. If you want to sponsor us hardware, software and/or (cloud)services, please contact Ted or Manon. Follow us on Twitter: https://twitter.com/SensemakersA

  • IoT Sensemakers on Biochemical sensing & on SensorThings

    Marineterrein Commandantswoning

    Every 3th Wednesday of the month we have presentations about IoT-related subjects. Doors open at 18.30 for networking. Presentations usually start at 19h & end around 20.30 with "open mic" when you can share your own story/event/question. This evening we have: - Just van den Broecke, Open Source Geospatial Architect who will talk about developing open sensor networks with lora-ttn and sensorthings-api - Dr. Gennady Oshovsky, professor of applied sciences (lector) in the Rotterdam University of Applied Sciences. His research and educational activities are focused on the thee vital topics for Rotterdam: water, sustainability and safety. This is realized in two project lines: ‘sensors, detection systems and sensor arrays’ and ‘green, sustainable and circular chemistry’. Their practice-oriented projects concentrate on the (bio)chemical sensor development and applications for water, air and above-water monitoring for environmental, sustainability, safety and police purposes. Since the selectivity and specificity of (bio)chemical sensors stays a challenge in the presence of many possible interferences, they develop sensors based on different detection principles for eventual simultaneous use to increase the reliability of the measurement results. Currently, they are focused on three types of sensors: electrochemical (especially e-nose), optical and colorimetric. Sensors are advanced systems that require combination of different expertise on every step starting from (bio)chemical signaling event, to electronics, to communication, to data analysis, sensor maintenance and, finally, to diverse applications. We all need sensitive, selective, stable, reliable, robust and cheap sensors providing (bio)chemical information with high speed, precision and accuracy that, depending on the application area, should be able to work in the air, water and ground, as well as in biological and chemically corrosive medium. Their work towards this challenging but very desirable goal and our plans will be discussed in the presentation.egal activities where chemicals are involved. ==================================== Everybody is welcome: Technical, non-technical or just interested. If you like to know more, be involved or are just curious: Just come to one of our meetups: - 1th Wednesday: DIY hands-on at the Makerspace in OBA - 3th Wednesday: Sharing knowledge, ideas & connecting people - Random: Specials (handson workshops), excursions or whatever comes up:-) As we want to bring you interesting speakers, who can share their thoughts, experiences and/or wisdom, we would appreciate you tipping us off when you know or heard about someone! Follow us on twitter: https://twitter.com/sensemakersa or join us on Slack by providing us your emailadress.

  • Do-It-Yourself @ Sensemakers Labs

    Amsterdam Public Library (OBA)

    Every first Wednesday of the month we have a non-organized meetup were OBA sponsors us with their location. During this evening you can start learning to work with Arduino, Microbit or work on a prototype to 3Dprint etc. Note that we don't provide a course, it is all about DIY, but you can join and help in our mutual projects or find people to join your own projects! Currently we are collaborating on Spacefarming, sensing sound & the monitoring of water quality. For ideas & materials you can also check: https://www.sensemakersams.org/internet-of-things-sensemakers-amsterdam/projects-diy/ We start at 18:00 and end the evening around 21:00. There are 3Dprinters, lasercutters, tools and enough outlets available! So just bring your laptop, ideas and lets get going! There is a cafe on the split level on the ground floor and a restaurant on the 7th, but please note that food & drinks are not allowed in the makerspace. If you want to sponsor us hardware, software and/or (cloud)services, please contact Ted or Manon. Follow us on Twitter: https://twitter.com/SensemakersA

  • IoT & Security in the context of Cyberwarfare

    Codam Coding College

    Every 3th Wednesday of the month we have presentations, open mic & discussions about IoT-related subjects. This evening we have: Chris Kubecka on IoT & security in the context of cyberwarfare, explaining how it works and sharing some useful take aways! Doors open at 18.30 at Codam College for networking & discussing projects. Presentations usually start at 19h & end around 20.30 with "open mic" when you can share your own story/event/question. ==================================== Everybody is welcome: Technical, non-technical or just interested. If you like to know more, be involved or are just curious: Just come to one of our meetups: - 1th Wednesday: DIY hands-on at the Makerspace in OBA - 3th Wednesday: Sharing knowledge, ideas & connecting people - Random: Specials (handson workshops), excursions or whatever comes up:-) As we want to bring you interesting speakers, who can share their thoughts, experiences and/or wisdom, we would appreciate you tipping us off when you know or heard about someone! Follow us on twitter: https://twitter.com/sensemakersa or join us on Slack by providing us your emailadress.

  • Do-It-Yourself @ Sensemakers Labs

    Amsterdam Public Library (OBA)

    Every first Wednesday of the month we have a non-organized meetup were OBA sponsors us with their location. During this evening you can start learning to work with Arduino, Microbit or work on a prototype to 3Dprint etc. Note that we don't provide a course, it is all about DIY, but you can join and help in our mutual projects or find people to join your own projects! Currently we are collaborating on Spacefarming, sensing sound & the monitoring of water quality. For ideas & materials you can also check: https://www.sensemakersams.org/internet-of-things-sensemakers-amsterdam/projects-diy/ We start at 18:00 and end the evening around 21:00. There are 3Dprinters, lasercutters, tools and enough outlets available! So just bring your laptop, ideas and lets get going! There is a cafe on the split level on the ground floor and a restaurant on the 7th, but please note that food & drinks are not allowed in the makerspace. If you want to sponsor us hardware, software and/or (cloud)services, please contact Ted or Manon. Follow us on Twitter: https://twitter.com/SensemakersA

  • Sensemakers Internet-of-Things Talks

    Codam Coding College

    Every 3th Wednesday of the month we have presentations, open mic & discussions about IoT-related subjects. This evening we have: TBA Doors open at 18.30 at Marineterrein (details will follow) for networking & discussing projects. Presentations usually start at 19h & end around 20.30 with "open mic" when you can share your own story/event/question. ==================================== Everybody is welcome: Technical, non-technical or just interested. If you like to know more, be involved or are just curious: Just come to one of our meetups: - 1th Wednesday: DIY hands-on at the Makerspace in OBA - 3th Wednesday: Sharing knowledge, ideas & connecting people - Random: Specials (handson workshops), excursions or whatever comes up:-) As we want to bring you interesting speakers, who can share their thoughts, experiences and/or wisdom, we would appreciate you tipping us off when you know or heard about someone! Follow us on twitter: https://twitter.com/sensemakersa or join us on Slack by providing us your emailadress.

  • Do-It-Yourself @ Sensemakers Labs

    Amsterdam Public Library (OBA)

    Every first Wednesday of the month we have a non-organized meetup were OBA sponsors us with their location. During this evening you can start learning to work with Arduino, Microbit or work on a prototype to 3Dprint etc. Note that we don't provide a course, it is all about DIY, but you can join and help in our mutual projects or find people to join your own projects! Currently we are collaborating on Spacefarming, sensing sound & the monitoring of water quality. For ideas & materials you can also check: https://www.sensemakersams.org/internet-of-things-sensemakers-amsterdam/projects-diy/ We start at 18:00 and end the evening around 21:00. There are 3Dprinters, lasercutters, tools and enough outlets available! So just bring your laptop, ideas and lets get going! There is a cafe on the split level on the ground floor and a restaurant on the 7th, but please note that food & drinks are not allowed in the makerspace. If you want to sponsor us hardware, software and/or (cloud)services, please contact Ted or Manon. Follow us on Twitter: https://twitter.com/SensemakersA

  • Sensemakers Internet-of-Things Talks

    Codam Coding College

    Every 3th Wednesday of the month we have presentations, open mic & discussions about IoT-related subjects. This evening we have: TBA Doors open at 18.30 at Marineterrein (details will follow) for networking & discussing projects. Presentations usually start at 19h & end around 20.30 with "open mic" when you can share your own story/event/question. ==================================== Everybody is welcome: Technical, non-technical or just interested. If you like to know more, be involved or are just curious: Just come to one of our meetups: - 1th Wednesday: DIY hands-on at the Makerspace in OBA - 3th Wednesday: Sharing knowledge, ideas & connecting people - Random: Specials (handson workshops), excursions or whatever comes up:-) As we want to bring you interesting speakers, who can share their thoughts, experiences and/or wisdom, we would appreciate you tipping us off when you know or heard about someone! Follow us on twitter: https://twitter.com/sensemakersa or join us on Slack by providing us your emailadress.

  • Do-It-Yourself @ Sensemakers Labs

    Amsterdam Public Library (OBA)

    Every first Wednesday of the month we have a non-organized meetup were OBA sponsors us with their location. During this evening you can start learning to work with Arduino, Microbit or work on a prototype to 3Dprint etc. Note that we don't provide a course, it is all about DIY, but you can join and help in our mutual projects or find people to join your own projects! Currently we are collaborating on Spacefarming, sensing sound & the monitoring of water quality. For ideas & materials you can also check: https://www.sensemakersams.org/internet-of-things-sensemakers-amsterdam/projects-diy/ We start at 18:00 and end the evening around 21:00. There are 3Dprinters, lasercutters, tools and enough outlets available! So just bring your laptop, ideas and lets get going! There is a cafe on the split level on the ground floor and a restaurant on the 7th, but please note that food & drinks are not allowed in the makerspace. If you want to sponsor us hardware, software and/or (cloud)services, please contact Ted or Manon. Follow us on Twitter: https://twitter.com/SensemakersA

  • Sensemakers Internet-of-Things Talks

    Codam Coding College

    Every 3th Wednesday of the month we have presentations, open mic & discussions about IoT-related subjects. This evening we have: TBA Doors open at 18.30 at Marineterrein (details will follow) for networking & discussing projects. Presentations usually start at 19h & end around 20.30 with "open mic" when you can share your own story/event/question. ==================================== Everybody is welcome: Technical, non-technical or just interested. If you like to know more, be involved or are just curious: Just come to one of our meetups: - 1th Wednesday: DIY hands-on at the Makerspace in OBA - 3th Wednesday: Sharing knowledge, ideas & connecting people - Random: Specials (handson workshops), excursions or whatever comes up:-) As we want to bring you interesting speakers, who can share their thoughts, experiences and/or wisdom, we would appreciate you tipping us off when you know or heard about someone! Follow us on twitter: https://twitter.com/sensemakersa or join us on Slack by providing us your emailadress.