Glass Hobbies

Time for a Happy Hour in Arlington, VA; 6:00 to 9:00 PM Come meet old Dive Buddies, new Dive Buddies, or chat about dive trips and diving. I'll have some information about trips to Bonaire, Belize, and the Cayman Islands as well as a couple of Florida Trips and Lake Phoenix. Come join the fun. Haven't gotten certified yet? We can help connect you with the right shop or instructor. The Brass Rabbit has graciously reserved high tops in the bar area so it will be easy to mix and mingle. They also have a great food and a good selection of libations. Look for the dive flag or safety sausage. The Brass Rabbit is easily accessible from the **Clarendon Metro** station. Looking forward to seeing everyone there. Its been a while.

Artistic Artifacts hosts **Open Stitch sessions EVERY Thursday evenings** from 5:30 - 7:30 pm — join us! This is a drop-in, bring your own hand stitching project and the necessary supplies (or you can knit, crochet... whatever needle arts you like). There’s no fee to attend, no instruction nor agenda — just a time to spend with other creatives! Visit our website for all our class & event information: **[https://artisticartifacts.com/collections/wk](https://artisticartifacts.com/collections/wk)**

The goal of this class is to help musicians find new and cool repertoire that gets played around the DMV oldtime music scene. SMT Teacher, Jonathan Vocke, has been an active member of the community for the last 15 years and is a skilled educator, multi-instrumentalist, and performer. In each class we will cover 2-3 new tunes. Tunes will be taught using the aural method and chords and rhythmic nuance of each tune will also be discussed. We will listen to source recordings of the tunes and discuss chording, bowing and general rhythmic accompaniment. Whether you play fiddle, banjo, guitar, mandolin or whatever else we can help you build you repertoire. $30 https://checkout.square.site/buy/67SKCWJV6CZTWK6YCDXMFGZA

***In Person Location:*** Rockville Library, second floor meeting room (Collaboration Room 3). We are experimenting with a new virtual join link - [https://meet.jit.si/mocomakers](https://meet.jit.si/mocomakers) If you can make it in person, that's always recommended! Let's resume repeated full end-to-end testing cycles and continue to iterate our design and resolution. We are getting close. Our community is building (and documenting for other teams) how to build a scanning tunneling microscope using a mix of common and 3D printed parts. This will allow us to scan and visualize a single atom - an ambitious we are doing over the course of a few months. The MoCo Makers community is one of the most innovative and competent groups in Maryland, and we've done everything from [publishing cancer research](https://pubmed.ncbi.nlm.nih.gov/38136356/), to [launching products](https://www.kickstarter.com/projects/gotim/cozy-curvy-multi-contour-pillow), [winning grants](https://covidinfocommons.datascience.columbia.edu/awards/2014255), and inspiring thousands. Now our biggest challenge yet has appeared. We are building a Scanning Tunneling Microscope, that will allow us to scan and visualize single atoms. Does it sound hard? Perhaps.. However! I have every confidence that we are now operating at a level were we can take on this mean, cross-functional project. We continue to build on our past successes, and a key technology we previously applied was increasing the signal of small voltages using OpAmps - which we did during our custom pH Probe project - [https://www.mocomakers.com/ph-probe/](https://www.mocomakers.com/ph-probe/) \- That technology is exactly what we need to get this machine working\, and at a high precision\! To get a better idea of what we are doing, see our reference project here: [https://www.youtube.com/watch?v=7N3OqTEq08g](https://www.youtube.com/watch?v=7N3OqTEq08g) All starting CAD, code, and reference files should exist. However, let's be the first Maker community to document the build process and share it with learners around the world. We have a bit over $2,000 in materials costs, so if you want to sponsor this project, and get banners at events with 20K attendees, and access to our email broadcast of 30K members, please contact matt@mocomakers.com We are also open to university, lab, or community partnerships so feel to reach out if you want to be part of this project. Together, we can do incredible things. ***In Person Location:*** Rockville Library, second floor meeting room (Meeting Room 3). To Join Virtually: https://meet.jit.si/mocomakers

Details Location: Crimson Whiskey Bar (Either the downstairs whiskey bar, or main floor bar, TBD) The purpose of Thinkers and Drinkers is to facilitate casual but meaningful and interesting conversations with other people in a face-to-face setting. The topics cover a wide variety of issues and are different for every meeting. While conversations may get heated at times, we ask that all members be respectful of each other and refrain from personal insults. Topic: The Gamblification of Everything Gambling is certainly not anything new. The idea of making a quick buck based on a game was just as appealing to ancient Mesopotamians as it is to estranged uncles who moved to Las Vegas. In the US, sports gambling has exploded since the Supreme Court ruling in 2018 that struck down a nationwide ban on sports betting. A [survey](https://sri.siena.edu/2025/02/18/22-of-all-americans-half-of-men-18-49-have-active-online-sports-betting-account/) released last year revealed 22% of Americans had an active sports betting account, and nearly half of men aged 18-40. This growth has mainly been associated with mobile apps like DraftKings, which thrive on allowing many small bets anytime, anywhere, on people's phones. Unsuprisingly this has led to a dramatic increase in gambling addictions for people in their 20s. It's not just sports gambling that has taken off, but other new betting markets like Polymarket that allow users to bet on anything from elections and international conflict to earthquakes and video game release dates. Meme/Joke markets like "[Whether or not Jesus will return this year](https://polymarket.com/event/will-jesus-christ-return-before-2027)" have popped up that have volume in the tens of millions of dollars. With prediction markets becoming legal in the US after a CFTC decision in October 2025, these prediction markets are set to grow more, both in terms of volume and the number of things they bet on. Questions to Consider: * Are sports gambling addictions overhyped? * Should the federal government put restrictions on sports betting and prediction markets? * How does the role of social media influence people's views on taking extraordinary risks to get rich fast? * What type of impact do prediction markets have on the things they are trying to predict? Could this provide adverse incentives for someone to influence an election just because of the bets they have taken?

This is an absolute beginner Bachata group class. It is specifically designed for those with no prior experience in Bachata and participations does not require having a partner. $25 per person for 90 minute class. [Click Here to Sign Up](https://form.jotform.com/250681156839162) Every Other Sunday: 2:00 pm to 3:30 pm Beginner Bachata.

Come the whole time or if you just spend 30 minutes. All are welcome. You are welcome and encouraged to bring your own coloring supplies but, if you don't have any, I will have plenty and am happy to share! (coloring books, colored pencils, and markers). Part of the mission of this group is to provide us an opportunity to check out AND SUPPORT local businesses. So, please don't bring any outside food/drinks and, while purchasing something isn't at all a REQUIREMENT to participate in the event, I do strongly encourage you to try something from the vendor :) I look forward to seeing and meeting you there! ***\*\*DISCLAIMER*\*\*** Photos may be taken during the event to be shared here on Meetup so feel free to let me know if you'd like to be excluded from them.

***Join us for a day in an electronics lab, as we attempt to finalize the system, and run scans for atoms.*** We will likely not succeed on our first attempt - but we still plan to put the time in. If you RSVP, you will get a DM with the address but it's located in Silver Spring. We will attempt full, clean lab - clean tip repeated scanning tests to see what we can learn and improve. We will experiment with online attendees, but if all possible showing up in person is strongly encouraged. Online join link is: - [https://meet.jit.si/mocomakers](https://meet.jit.si/mocomakers) Our community is building (and documenting for other teams) how to build a scanning tunneling microscope using a mix of common and 3D printed parts. This will allow us to scan and visualize a single atom - an ambitious we are doing over the course of a few months. The MoCo Makers community is one of the most innovative and competent groups in Maryland, and we've done everything from [publishing cancer research](https://pubmed.ncbi.nlm.nih.gov/38136356/), to [launching products](https://www.kickstarter.com/projects/gotim/cozy-curvy-multi-contour-pillow), [winning grants](https://covidinfocommons.datascience.columbia.edu/awards/2014255), and inspiring thousands. Now our biggest challenge yet has appeared. We are building a Scanning Tunneling Microscope, that will allow us to scan and visualize single atoms. To get a better idea of what we are doing, see our reference project here: [https://www.youtube.com/watch?v=7N3OqTEq08g](https://www.youtube.com/watch?v=7N3OqTEq08g) All starting CAD, code, and reference files should exist. However, let's be the first Maker community to document the build process and share it with learners around the world. We will be publishing our work here -[ https://hackaday.io/project/202816-qt-panda](https://hackaday.io/project/202816-qt-panda) If you need a ride, let us know.

Looking for a creative night out that isn’t boring or corporate? Come hang out at **The Arcane Foundry** for an open candle bar and a 3D print paint and sip! Choose something from our 3D-printed shelf — *think ceramic paint-and-sip, but way cooler and with custom models we print in-house.* Or head to the candle bar and pick your fragrances to pour your own **pillar candle or container candle**. Sip complimentary tea, enjoy bakery snacks, and **BYOB wine or beer** while you paint, pour, and make whatever the hell you feel like making. No experience needed — this is all vibes, fun, and meeting new people while creating something you’ll actually want to take home. Starting at a very low price of $10 and up for paint and sip (Includes use of community paints, paint pallet, paint brushes) PLA Models starting at $10 and up 75mm Resin Fantasy Models $25 32mm Table-Top Miniatures $10 **Candle Making** (includes vessel, your choice of wick, wax, scented oil, labels and lids) 5oz Glass Jars $15 8oz Candle Tins $25 12oz Glass Candles $35 12oz Amber Jars $40 16 oz Skull or Jack o Lantern Candle Mugs $60 (Limited Edition!) \[www\.thearcanefoundry\.com\]\(The Arcane Foundry\) **All materials included. You just bring yourself (and your drink of choice).** **Payments accepted:** * Cash * Venmo: @Daclaud-Lee * Cashapp: $DaclaudL * PayPal: daclaudlee@gmail.com

Looking for a creative night out that isn’t boring or corporate? Come hang out at **The Arcane Foundry** for an open candle bar and a 3D print paint and sip! Choose something from our 3D-printed shelf — *think ceramic paint-and-sip, but way cooler and with custom models we print in-house.* Or head to the candle bar and pick your fragrances to pour your own **pillar candle or container candle**. Sip complimentary tea, enjoy bakery snacks, and **BYOB wine or beer** while you paint, pour, and make whatever the hell you feel like making. No experience needed — this is all vibes, fun, and meeting new people while creating something you’ll actually want to take home. Starting at a very low price of $10 and up for paint and sip (Includes use of community paints, paint pallet, paint brushes) PLA Models starting at $10 and up 75mm Resin Fantasy Models $25 32mm Table-Top Miniatures $10 **Candle Making** (includes vessel, your choice of wick, wax, scented oil, labels and lids) 5oz Glass Jars $15 8oz Candle Tins $25 12oz Glass Candles $35 12oz Amber Jars $40 16 oz Skull or Jack o Lantern Candle Mugs $60 (Limited Edition!) \[www\.thearcanefoundry\.com\]\(The Arcane Foundry\) **All materials included. You just bring yourself (and your drink of choice).** **Payments accepted:** * Cash * Venmo: @Daclaud-Lee * Cashapp: $DaclaudL * PayPal: daclaudlee@gmail.com

Come chat about Atlassian tools and best practices at the Nationwide Sunny Street Cafe and Breakfast is on Atlassian! Let's get the day started off with breakfast with your ACE Leaders! We're always excited to talk about Atlassian Products, share our knowledge and hand out swag! Come chat with us about new product news and anything you are working on within the Atlassian product stack. This is a great opportunity to come see what we are all about, hear new business news and share with other Atlassian users your questions and experiences. We'd love to see new and old friends come out to chat and learn about Atlassian! Agenda --- Moderators Kimberly Deal - Columbus Atlassian User Group Leader Kevin Stanley - Columbus Atlassian User Group Leader Hosted By Kimberly Deal, Atlassian User Group Leader Kevin Stanley, Chief Everything Greg Sprowls, Agility Lead --- Global Partner Atlassian (http://atlassian.com) Millions of users globally rely on Atlassian products every day for improving software development, project management, collaboration, and code quality. Partner Atlassian --- For over a decade, Atlassian customers have come together to network, share ideas, solve problems, and find new ways to use Atlassian products. Today, more than 15,000 people take part in Atlassian community events in more than 30 countries. --- Complete your event RSVP here: https://ace.atlassian.com/events/details/atlassian-columbus-presents-rise-and-shine-with-atlassian-downtownnationwide-22/.

🏓 **CSC Pickleball League – Join the Fun!** Whether you're competitive or just want to connect with fellow members, this friendly ladder league is for you! 🗓 **March 10 – April 28** ⏰ Tuesdays \| 7:00–9:00 PM 📍 Match Point Pickleball Club – 350 McCormick Blvd, Columbus 💲 $85 per player (pay only when you play – no sub needed) **YOU MUST SIGN UP VIA LINK BELOW AND PAY PRIOR TO 3/10 TO RESERVE YOUR SPOT.** [Pickleball 2026 - Calendar - Columbus Ski Club](https://www.columbusskiclub.org/content.aspx?page_id=4002&club_id=686961&item_id=2887671&actr=3) No equipment required (bring your own paddle if you prefer). Partners rotate weekly, and skill levels are assigned by the facility—no experience needed! Come out, improve your game, and meet great people. All skill levels welcome!

Bring your Raspberry Pi, Arduino, microcontroller, or any other electronic project and join fellow electronics makers for a night of creativity and collaboration! This session is open forum to share your current projects—whether complete or in progress, it’s all interesting! Whether you’re deep into embedded systems, exploring new ideas, or just getting started, you’ll find a welcoming space to collaborate, share, and get inspired. **New to electronics or curious about tinkering?** You’re absolutely welcome. If you’re a beginner and want to experiment, I’ll have a couple of starter kits available so you can try things out—whether that’s blinking your first LED, putting something on a display, or experimenting with simple sensors. No pressure and no experience required—just an interest in learning and building. While we continue to pursue a more permanent venue for this Meetup, we’ll be using public library facilities based on availability. This session will be at the Worthington Park Library in the Olentangy Meeting Room.

Let’s knock down some pins and knock back a few drinks while we’re at it. Bowling is one of the best stress relievers out there, so bring your A game and let’s see what you’ve got. It’s $20 per person, which includes free shoe rental and two hours of open bowling. We’ll start with six people per lane. Once we have six, we’ll grab our lane and get rolling. If more people show up after that, we’ll snag the lane right next to us and keep the party going. Come ready to have some fun.