About us
Bitraf opened on March 1st 2012, and is Norway's largest hackerspace and makerspace. We cover a wide range of creative activities: electronics, wood- and metalwork, 3D printing, laser cutting, sewing, molding/casting, costume making and a whole lot of other things. More information at http://bitraf.no
Please note: you do not need to pay anything to Meetup.com to attend a Bitraf event! They're just trying to scam you, reducing the value of their platform.
Upcoming events
69

Workshop Make a stool
Bitraf, Brenneriveien 9, 0182 Oslo, Norway, Oslo, NOIn this workshop you will be making a stool out of pine wood. The design is based on the design of Keiji Ashizawa's design from the Ishinomaki Laboratory, but you can deviate from the existing design by making it smaller or larger. During this course you'll learn to work with the miter saw and drill. You don't need any prior experience in the wood workshop to attend this workshop. At the end of the workshop you take home your selfmade stool!
Before the workshop, it is important to understand the following:
- This course is for paying Bitraf members only. If you are not a paying member, sign up for membership at https://bitraf.no/# before the course.
- We ask for the costs of the materials that you'll use: 175 NOK.
- The course takes about 6 hours, so bring lunch and snacks!
- This course is in English.
- It is possible to work on one stool with two people (only one person signs up on meetup, but let me know who is joining).
- We'll meet each other at the table in the kitchen 10 minutes before the start.
- You are responsible for yourself, Bitraf has no liability if you get injured.
Please make sure you have:
- Lung protection (dust masks are also sold through Bitmart)
- Eye protection
- Hearing protection
- Safety boots
At the end of the workshop you'll go home with a stool and new skills. It can happen that you are not finished at the end of the workshop, in which case you can come back another time to finish your project!
Important meetup notices:
- You do not need to pay anything to [Meetup.com](http://meetup.com/) to attend a Bitraf event!
- There is a chance that people cancel (happens a lot), so make sure you reserve the time in your calendar when you're on the waitlist and keep an eye out for any changes.
- You are not allowed to reserve a spot for somebody else.
5 attendees
Shopbot CNC theory and practical
Bitraf, Brenneriveien 9, Oslo, NOThis course is necessary for new users of the Shopbot CNC at Bitraf to establish baseline knowledge & safety standards that everyone can expect from each other.
It will be held in English.
This course is fills up quickly - be the person that signs up and takes the opportunity to join a course seriously. If you don't turn up, you take away the opportunity to learn from someone else. Book the course time & date in your calendar, even if you're on the waiting list. It is very common to get bumped up as the course date/time approaches.
Signing up to the wait list means you take on the responsibility to check the event daily (even on the day of/hours before the event) and the possibility to turn up at short notice. If you know it's likely you won't have the time anymore, please change your RSVP to 'no' to remove yourself from the wait list as soon as you're aware.
Don't cancel last minute
** IMPORTANT **
This course is for paying Bitraf members only. It's a free course, but if you RSVP 'yes' and don't actually show up, you'll be fined 300 kroner, as an extra compensation to the course organizer.Norwegian and English documentation for the CNC Shopbot machine can be found at
https://wiki.bitraf.no/wiki/ShopBot
https://paper.dropbox.com/doc/Shopbot-CNC-Practical-Course--CPuhw4ZeIcusxBHmxQHNSskPAg-oloV0VUdz7KmXWh7OTA9KWe start in the course room for the theory and move up to the practical section in the workshop after.
Things to do before the course;
- Install Dropbox (for transferring files to the CNC machine as memory cards or USB sticks cannot be used)
- Be part of Bitrafs 'google group'
Click here for how to join Bitraf's google group! - Join Bitrafs slack channel
https://bitraf.no/slack-invite/
It's an advantage if you look through the Shopbot tutorial videos:
Shopbot Training TutorialsUpon completion of course you will have Shopbot CNC access via the p2k16 ‘TOOLS’ system. This enables use of the machine to be logged.
Thank you for your time and future attention.
Please note: you do not need to pay anything to Meetup.com to attend a Bitraf event! They're just trying to scam you, reducing the value of their platform.
5 attendees
Past events
2984




