Skip to content

Getting Your Project from VCarve to CNC (Members Only)

Photo of Bill Shaw
Hosted By
Bill S.
Getting Your Project from VCarve to CNC (Members Only)

Details

Turn your project in VCarve into appropriate toolpaths for either the Shopbot or Shapeoko.

This class will show you how to setup the default bits for each tool and export the toolpaths for Hackerspace's Shopbot, Shapeoko and Maslow CNC machines.

Prerequisite
To use VCarve, students should have their own laptops with the Makerspace Edition of VCarve installed and ready to go. To get the software, go to https://www.vectric.com/products/vcarve/trial.html to download the VCarve Pro Trial Edition. Once installed, you will need to "enter the Makerspace ID to connect the trial to the Makerspace client". This ID number is pinned in the #CNC channel on THS slack. Alternatively, you could use the VCarve software installed on our CAD machines.

This meetup is open to paid members only. For details on becoming a member of Tampa Hackerspace, please visit http://tampahackerspace.com/membership/

Note: This is not the only way to generate toolpaths for these machines. You must have a usable toolchain for CAM. Fusion 360 and VCarve are both viable options as valid toolchains. Either of these would be a suitable prerequisite for sign off on the listed CNC machines.

Photo of Tampa Hackerspace group
Tampa Hackerspace
See more events
4931 W Nassau St
4931 W Nassau St · Tampa, FL