Laser Cutter Orientation (Members Only)

Nothing gets you through the week better than high powered lasers!

This is the class one must take to get approval to operate the Tampa Hackerspace laser cutter/engraver. It covers the basics of preparing raster and vector images for use with the laser, operating the laser safely, and basic procedures. We will also cover what materials the laser is capable of cutting and etching and which materials must be avoided. We'll also demonstrate the air assist and rotary table.
**Plan to arrive 10 minutes early to get settled and signed in. The class will start on time.

This class is free to paid members of Tampa Hackerspace. Information on becoming a paid member can be found on our website (http://tampahackerspace.com/membership).

Please don't forget that we have several restrictions in place related to the Covid-19 pandemic.

If you are sick or believe you have been exposed to Covid-19, change your RSVP and stay home.

1. Masks are required and must be properly worn.
2. We are providing face shields that may be worn along with the masks at the instructor's discretion.
3. You may be temperature screened when you arrive.
4. Maintain social distancing during the class.
5. If the instructor is not comfortable with your participation, you could be asked to leave without completing this class. This is done for the safety of everyone in the class.
6. You must badge in even if the door is open. We need to have a record of everyone's presence in case there is a future or unexpected problem (e.g. contact tracing is required).