Name: Learn to use Bitraf's table saw
Start: 2019-12-06T12:00:00+01:00
End: 2019-12-06T16:00:00+01:00
Location: Bitraf

This course is necessary for everyone who wants access to the table saw at Bitraf - whether a beginner or experienced user - to establish baseline knowledge & standards that everyone can expect of each other.

**IMPORTANT**
This safety course is for paying Bitraf members only. It's a free course, but if you rsvp 'yes' and don't actually show up, you'll be deducted 300kr kroner extra, as an extra compensation to the course organiser.

**VIKTIG**
Dette sikkerhetskurset er kun for betalende Bitraf-medlemmer. Det er et gratis kurs, men hvis du rsvp 'ja' og faktisk ikke dukker opp, blir du trukket 300kr ekstra, som en ekstra kompensasjon til kursarrangøren.

-------------------------------------------------------------------------------------

The intention of the course is to develop safe working practices for the safety of you, others at Bitraf, and the machine. This is required knowledge that must put into use every time you use the table saw to be safe and excellent to each other.

An attitude of learning and a dust mask is all that is required. If you don't have, you can buy both in Bitmart from 35kr. It is a requirement to use the dust mask with other safety equipment in the Carpenters Workshop.

YOU are responsible for yourself, Bitraf has no liability if you are injured.

4 people per course
The course needs 3 attendees minimum to go ahead as scheduled (excluding course holder).

It is a 5-part course with a small break, taking up to 4 hours approx.

This course in is English only

Things to have ready for course:

- Dust Mask (available in Bitmart for 35kr)
- Eye and Hearing protection (Bitraf will provide if you don't have)
- A mind of giving what you have - time and an open mind

Upon completion of course you will have table saw access via the p2k16 ‘TOOLS’ system. This enables use of the machine to be logged.

Sign up to the waitlist only if you're prepared to check the event daily to see if a place has become available, and have the possibility to turn up at short notice if somebody drops out.

Thank you for your time and future attention.

Yoshi

Bitraf

Technology

Makers

DIY (Do It Yourself)

Coworking

Creativity

Open Source

Electronics

3D Printing

Cosplay

Game Programming

Startup Businesses

Linux

Education & Technology

Makerspaces

3D Modeling

Hacking

Learn to use Bitraf's table saw

Share

What does your past 12 months of Meetup reveal about you? It's time to relive your personal highlights!

Don't miss your <highlight>2025 recap!</highlight>

Bitraf

Learn to use Bitraf's table saw

Bitraf

Details

Members are also interested in