Makers

**ProductTank NoVA is back!** After a brief hiatus, we are relaunching the chapter with a format that cuts out the fluff and gets straight to the reality of building. Every product feed is flooded with AI hype right now, but what does it actually look like on the ground? Instead of a polished keynote, we are hosting **0 to 1 with AI: Real Product Talks**—a "Show & Tell" featuring 3–4 lightning talks focused on the intersection of AI and product. The framing for the talks is simple: *"Here is what I'm building, and here is what I'm stuck on."* We want to look at the messy, 0-to-1 reality of integrating AI into your workflows and products. *(Want to share what you are working on? Reach out! The bar is low-pressure, just 10–12 minutes to talk about a real AI problem you are trying to solve.)* **Agenda:** * **5:30 PM - 6:00 PM:** Doors open, networking, & name tags * **6:00 PM - 6:10 PM:** Welcome + Chapter Relaunch Intro * **6:10 PM - 7:30 PM:** Lightning Talks (Three 12-min talks + 5 mins Q&A each, with a 5-min stretch break) * **7:30 PM - 8:00 PM:** Open networking * **8:00 PM:** Soft close **Location & Logistics:** Herndon Fortnightly Library (Extended Hours Meeting Room) 768 Center St, Herndon, VA 20170 * **Parking:** We'll meet at the library, located just behind the Herndon Municipal Center. There is plenty of free public parking available around the municipal center. * **Metro & Bus:** Take the Silver Line to Herndon Metro Station, then connect via Fairfax Connector Route 921 or 950 to Historic Downtown Herndon. * **Driving (via VA-267/Dulles Toll Rd):** Take Exit 10 North (Centreville Rd, which becomes Elden St). Turn left onto Station St or Lynn St. * **Driving (via VA-286/Fairfax Co Pkwy):** Take the Elden St West exit. Turn right onto Lynn St. Looking forward to seeing everyone again and getting back to building!

Note: This is an RSVP with Prepay only event. Coaches have the right to deny your participation if you haven't prepaid for the event. MAKE SURE YOU CAN RECEIVE MESSAGES AND NOTIFICATIONS WITH UPDATES FROM THE LESSONS. Profile->settings->manage notifications. **3.0 – Match Makers** Players can consistently rally at a higher pace and maintain depth closer to the baseline. They are developing offensive tools, including more aggressive groundstrokes and put-away volleys, and show improved ability to handle deeper, faster shots. They started developing a faster kick serve, but are still working on increasing its speed. The lesson will start with rally drills then play games to emphasize on the rally drills. Finally, we will finish up with service games. Players will constantly hit and move with minimal break. All lessons are different. 1. RSVP "YES" Then PREPAY if you are coming to secure your spot on the lesson. Update RSVP to "NO" if you are not attending before RSVP deadline. **COACH TO PLAYER RATIO:** 1\. Maximum 1/6 for Coach/Player ratio for a 90\-minute session 2\. Make sure you RSVP to the lesson according to your level\. If we notice your level doesn't fit in the lesson you RSVP\, we will ask you to RSVP for a different session that matches your level\. I hope everyone understands\. **Cancelation Policy:** *If only two or fewer RSVP for a group lesson, the lesson will be canceled. The minimum requirement for a group is three participants. - If the host cancels a session, you get an option for a refund or credit for the next session. *The prepaid fee is non-refundable and cannot be transferred to another session when participants cancel on the same day. **Your contribution:** - Your contribution: A one-time donation request per year of 20 to support our tennis equipment expenses. *Four sessions package to use within five weeks: 112 - single session prepay; $35 **PAYMENTS METHODS:** 1-VENMO APP: joseph_awadalla 2.Zelle:202-746-1094,joseph.awadalla@gmail.com 3.Paypal: joseph.awadalla@gmail.com Thank you for your support.

*Shut Up & Write!* meets at the Brambleton Library in Room B. We hope to see you there! Shut Up & Write! *is not affiliated with the Loudoun County Public Libraries*.

Today we are Steve's Lab. RSVP and you'll be sent the location. It's in Silver Spring. ***Join us for an evening in an electronics lab where we will attempt to run clean scans of graphene and gold samples, and then clean up that data with post processing.*** This is a high sensitivity experiment, and we do not plan on being successful so early. But we've had promising results lately - so we will be putting in the time. We are NOT meeting at our usual location, but rather at Steve's house/lab. If you RSVP, you will get a DM with the address but it's located in Silver Spring. We will attempt full, clean lab - clean tip repeated scanning tests to see what we can learn and improve. We will experiment with online attendees, but if all possible showing up in person is strongly encouraged. Online join link is: - [https://meet.jit.si/mocomakers](https://meet.jit.si/mocomakers) Our community is building (and documenting for other teams) how to build a scanning tunneling microscope using a mix of common and 3D printed parts. This will allow us to scan and visualize a single atom - an ambitious we are doing over the course of a few months. The MoCo Makers community is one of the most innovative and competent groups in Maryland, and we've done everything from [publishing cancer research](https://pubmed.ncbi.nlm.nih.gov/38136356/), to [launching products](https://www.kickstarter.com/projects/gotim/cozy-curvy-multi-contour-pillow), [winning grants](https://covidinfocommons.datascience.columbia.edu/awards/2014255), and inspiring thousands. Now our biggest challenge yet has appeared. We are building a Scanning Tunneling Microscope, that will allow us to scan and visualize single atoms. To get a better idea of what we are doing, see our reference project here: [https://www.youtube.com/watch?v=7N3OqTEq08g](https://www.youtube.com/watch?v=7N3OqTEq08g) All starting CAD, code, and reference files should exist. However, let's be the first Maker community to document the build process and share it with learners around the world. We will be publishing our work here -[ https://hackaday.io/project/202816-qt-panda](https://hackaday.io/project/202816-qt-panda) If you need a ride, let us know.

Shut up & Write! meets at the Gum Springs public library room C. We hope to see you there! Shut Up & Write is not affiliated with the Loudoun County Public Libraries.

**Sunday Texas Hold-Em Tournament** **Cost: No cost** **Time: 1:30 pm - 3:30 pm** **Starting Stack: 30,000 chips** **Bonuses: 5,000 for arriving early, 5,000 for new players, 5,000 for registering online** **Blind structure** **Level 1: 100 chips / 200 chips** **Level 2: 200 chips / 400 chips** **Level 3: 300 chips / 600 chips** **Level 4: 400 chips / 800 chips** **Level 5: 500 chips / 1,000 chips** **10 minute break / chip up** **Level 6: 1,000 chips / 2,000 chips** **Level 7: 2,000 chips / 4,000 chips** **Level 8: 3,000 chips / 6,000 chips** **chip up** **Level 9: 5,000 chips / 10,000 chips** **Level 10: 10,000 chips / 20,000 chips** **Level 11: 15,000 chips / 30,000 chips** **Level 12: 25,000 chips / 50,000 chips** **chip up** **Level 13: 50,000 chips / 100,000 chips** **Level 14: 100,000 chips / 200,000 chips** **Level 15: 200,000 chips / 4000,000 chips**

Want to work on your project or learn new skills? Check out Weird Brothers Craft Exchange! Swap materials and skills. Find a cozy spot to work in peace. Or just enjoy the ambiance with a warm mug in hand.