Hackers and Makers

Looking for a new skill? Want to seem mysterious when people ask about your hobbies? Enjoy puzzles? Lock picking might be right for you! Is this legal? Yes! Is it fun? Yes! The meeting is very casual, come and go as you please. We meet in the upstairs area of Board Room. No payment, skills, tools, or RSVP necessary. If you can make small precise movements with your hands, you can learn to pick locks. Introductory talk at 7pm. All are welcome. We meet in a bar but minors are allowed to attend. We are not in a private room; parental discretion advised. If you are a minor or are responsible for one who's attending, please email the organizer in advance at chapter-DC@toool.us Open invite; bring friends! We are the DC chapter of TOOOL. More information here: http://toool.us/

Founder Institute is teaming up with AI Collective and Cognition — the AI software development platform behind Windsurf, Devin, and DeepWiki — for a hands-on evening of building, demos, and community. One platform that understands, writes, and ships code. Join us to experience it all in action and start building.​ ❯ **Guest Speakers include:** * Guc Ozenci (Program Director, FI Washington DC) * Catherine Mc Millan (Founding Director, AI Collective) ❯❯ **Learn more about this great event at [https://luma.com/openbuild-dc](https://luma.com/openbuild-dc)** **Please REGISTER as there is limited space for this hands-on workshop event.** You can also attend virtually. ❯ **Agenda - Washington DC TimeZone:** ​5:30 PM: Doors open, grab food & drinks; FI & AI Collective Welcome 6:00 PM: Cognition Platform Demo (see what's possible) 6:20 PM: DevRel Deep Dive (tips, tricks, and power moves) 6:50 PM: Open Build (build whatever calls to you) 8:15 PM: Code & Tell (show off what you made — or didn't) 8:30 PM: Wrap-up ❯❯ **Learn more about this great event at [https://luma.com/openbuild-dc](https://luma.com/openbuild-dc)** **Please REGISTER as there is limited space for this hands-on workshop event.**

Let's tour some of the beautiful gardens of DC Route: 1\. Meet in the courtyard of the National Portrait Gallery and check out the garden there 2\. Walk south to National Art Gallery Sculpture Garden 3\. Walk across the mall to the rose garden outside the smithsonian castle 4\. Checkout the Enid A\. Haupt Garden behind the castle 5\. Walk past the National Museum of the American Indian and view the gardens outside 6\. Walk by the National Botanic Gardens 7\. Walk past the US capitol building 8\. End at Eastern Market metro **Time:** \~5:30 pm - 7:30 pm **Start Location:** Courtyard of the National Portrait Gallery (Gallery Place metro station) **End Location:** Eastern Market Metro **Map/Route:** https://maps.app.goo.gl/ZGT3qCKMk5FzhwqV7 **Millage:** 3.0 **Terrain:** There will mostly be paved and level ground. \-\-\- We try to be punctual with our event times so please be respectful to others and show up a few minutes early. Note, we often limit the RSVPs to keep group sizes manageable. If you are on the waitlist but would really like to join, reach out to the organizer. Our events prioritize metro accessibility by meeting and ending at metro stations. Sometimes we start/stop at the same station, sometimes we do not. Please double check the event description to see if you can manage transportation.

This is an opportunity for volunteers to support a professional mechanic as he guides customers working on their own bikes. If you know how to do some basic repairs, that's a plus, but even if you don't, you can greet customers and manage who gets helped next. Feel free to attend for only a portion of the time if you can't be there the whole three hours. Please note that this event is not usually an opportunity to learn about bicycle repair, since the mechanic tends to be very busy helping customers, especially during the warmer months. But it's a great way to contribute to Velocity, since almost all the funding for the volunteer program comes from the work done at the shops.

***In Person Location:*** Rockville Library, second floor meeting room (Collaboration Room 3). We are experimenting with a new virtual join link - [https://meet.jit.si/mocomakers](https://meet.jit.si/mocomakers) If you can make it in person, that's always recommended! Let's resume repeated full end-to-end testing cycles and continue to iterate our design and resolution. We are getting close. Our community is building (and documenting for other teams) how to build a scanning tunneling microscope using a mix of common and 3D printed parts. This will allow us to scan and visualize a single atom - an ambitious we are doing over the course of a few months. The MoCo Makers community is one of the most innovative and competent groups in Maryland, and we've done everything from [publishing cancer research](https://pubmed.ncbi.nlm.nih.gov/38136356/), to [launching products](https://www.kickstarter.com/projects/gotim/cozy-curvy-multi-contour-pillow), [winning grants](https://covidinfocommons.datascience.columbia.edu/awards/2014255), and inspiring thousands. Now our biggest challenge yet has appeared. We are building a Scanning Tunneling Microscope, that will allow us to scan and visualize single atoms. Does it sound hard? Perhaps.. However! I have every confidence that we are now operating at a level were we can take on this mean, cross-functional project. We continue to build on our past successes, and a key technology we previously applied was increasing the signal of small voltages using OpAmps - which we did during our custom pH Probe project - [https://www.mocomakers.com/ph-probe/](https://www.mocomakers.com/ph-probe/) \- That technology is exactly what we need to get this machine working\, and at a high precision\! To get a better idea of what we are doing, see our reference project here: [https://www.youtube.com/watch?v=7N3OqTEq08g](https://www.youtube.com/watch?v=7N3OqTEq08g) All starting CAD, code, and reference files should exist. However, let's be the first Maker community to document the build process and share it with learners around the world. We have a bit over $2,000 in materials costs, so if you want to sponsor this project, and get banners at events with 20K attendees, and access to our email broadcast of 30K members, please contact matt@mocomakers.com We are also open to university, lab, or community partnerships so feel to reach out if you want to be part of this project. Together, we can do incredible things. ***In Person Location:*** Rockville Library, second floor meeting room (Meeting Room 3). To Join Virtually: https://meet.jit.si/mocomakers

***Join us for a day in an electronics lab, as we attempt to finalize the system, and run scans for atoms.*** We will likely not succeed on our first attempt - but we still plan to put the time in. If you RSVP, you will get a DM with the address but it's located in Silver Spring. We will attempt full, clean lab - clean tip repeated scanning tests to see what we can learn and improve. We will experiment with online attendees, but if all possible showing up in person is strongly encouraged. Online join link is: - [https://meet.jit.si/mocomakers](https://meet.jit.si/mocomakers) Our community is building (and documenting for other teams) how to build a scanning tunneling microscope using a mix of common and 3D printed parts. This will allow us to scan and visualize a single atom - an ambitious we are doing over the course of a few months. The MoCo Makers community is one of the most innovative and competent groups in Maryland, and we've done everything from [publishing cancer research](https://pubmed.ncbi.nlm.nih.gov/38136356/), to [launching products](https://www.kickstarter.com/projects/gotim/cozy-curvy-multi-contour-pillow), [winning grants](https://covidinfocommons.datascience.columbia.edu/awards/2014255), and inspiring thousands. Now our biggest challenge yet has appeared. We are building a Scanning Tunneling Microscope, that will allow us to scan and visualize single atoms. To get a better idea of what we are doing, see our reference project here: [https://www.youtube.com/watch?v=7N3OqTEq08g](https://www.youtube.com/watch?v=7N3OqTEq08g) All starting CAD, code, and reference files should exist. However, let's be the first Maker community to document the build process and share it with learners around the world. We will be publishing our work here -[ https://hackaday.io/project/202816-qt-panda](https://hackaday.io/project/202816-qt-panda) If you need a ride, let us know.

Want to mess with some electronics? Or perhaps contribute to HacDC's main group project? HacDC's latest event brings hardware projects to the community. We will focus primarily on the main project (Space Blimp!) but please feel free to bring some of your own projects to show off and work on!

**CHILL N CHESS/CHECKERS** Come play!! Classic, clock, social. From novice to grandmaster. We play both chess and [American Pool Checkers](https://en.wikipedia.org/wiki/American_Pool_Checkers) (not your kindergarten checkers!). Come chill with us, get your mind in the game. We offer Blunder Support Groups ;) 🤦‍♂️ **How’s your week?** Did you hang a queen? Fork yourself? Promote to *rook* instead of queen? 😭 > **Don’t worry—we’ve all been there.** > (Literally. We meet weekly. Bring snacks.) **Parking/transit:** Street parking. Also there are private parking lots in Adams Morgan. For public transportation: Five city blocks away from Columbia Heights Metro stop. Same block for bus stops: D60 and D6X on 16th St. A 7 minute walk from the C51 bus stop and same block for D72 bus stops on Columbia. We limit spots to 10 players on meetup in order to maintain space for everyone -our regulars and players from other signups

This month, we'll have a recorded talk, followed by discussion, on API design and single-header libraries. How should we structure and program libraries to impose as few usage constraints as possible? We’ll look at [the STB libraries](https://github.com/nothings/stb) and other examples as case studies. We're still at the West End Library - see the location in the sidebar for details. **Agenda:** \- 2pm \- 3pm: Library discussion \- 3pm \- 4pm: Open\-ended discussions\, presentations\, etc\. \- 4pm \- whenever: We'll go get food nearby\! **What we do** Presentations on lower-level, foundational programming topics, ethical software, knowledge sharing, mentoring, and discussion. **Who we are:** We are all about handmade software. Rather than focus on frameworks, heavy abstractions, and buzzwords - we typically create projects or research topics that build an understanding of foundational computing concepts, essential data structures, and hardware/software interaction. **What to bring?** Bring a laptop, project, or just a curious mind. If you're not sure you're ready to contribute, don't worry: we're all here to share our passions and hone our craft. **If you arrive late:** Please enter the room quietly as to not disrupt anyone that is presenting. You can take any empty seat.

Join us on **Thursday, March 5th** for SPD’s first ever Kickback & Connect in **Washington, D.C.** From magazines to murals and from newsrooms to nonprofits, if you make things in D.C., you’re invited. This is a low-key happy hour bringing together designers and creatives across disciplines in the DMV to kickback, connect, and share ideas—no panels, no pitches, no pressure. We hope to see you there! **Music by: Friends on Mars** Hosted by Good People DC and **[SPD](https://www.spd.org/)**, a nonprofit design community rooted in publishing and creative excellence. No cover charge = no excuse not to come Must be 21 to enter. Please drink responsibly.

DC Code and Coffee is an inclusive, informal co-working session. It's community-led and community-run by devs, for devs. People of all skill levels attend. Whether you’re dev-curious, aspiring, or a professional developer, we’d love to have you! Come chat or learn to code on a Sunday afternoon with coffee and cool-inclusive people. Bring your laptop! We typically meet every month on the weekend. **Join our online community!** For all things Tech in DC and to get latest updates and tech events from the DMV area, join the [DCTech Slack](https://dctech.chat/). All DC Code & Coffee announcements are in the #dccodecoffee channel **How it works** Near the beginning of the event, we do an introduction circle. You say your name, what you can help others with, and what you would like help with. You can also share job opportunities. After the introduction circle, everything is self-organized. **Event Host and Directions** We are meeting in the big meeting room at the back of the library.

Columbus Code & Coffee is an inclusive, informal co-working session. People of all skill levels attend, and we love it that way. Many people (optionally) bring projects to work on, and many other people (optionally) socialize the entire time. It's entirely up to you! **What to Expect at the Intro Circle** \~\~\~\~\~\~\~\~\~\~\~\~\~ Near the beginning of the event (1:30 pm), we do a standup: * Organizer announcements, updates, and logistics Round 1 - (7 secs max): * Your name * What you're working on * What you can help others with Round 2: * Community events you wanna plug. If none, that's cool too. Round 3: * Job opportunities you're hiring for OR announce that you are looking for one. If none, that's cool. After the introduction circle, everything is self-organized! Feel free to work alone, pair up, attend one of our workshops/presentations, or mingle!

Bring your Raspberry Pi, Arduino, microcontroller, or any other electronic project and join fellow electronics makers for a night of creativity and collaboration! This session is open forum to share your current projects—whether complete or in progress, it’s all interesting! Whether you’re deep into embedded systems, exploring new ideas, or just getting started, you’ll find a welcoming space to collaborate, share, and get inspired. **New to electronics or curious about tinkering?** You’re absolutely welcome. If you’re a beginner and want to experiment, I’ll have a couple of starter kits available so you can try things out—whether that’s blinking your first LED, putting something on a display, or experimenting with simple sensors. No pressure and no experience required—just an interest in learning and building. While we continue to pursue a more permanent venue for this Meetup, we’ll be using public library facilities based on availability. This session will be at the Worthington Park Library in the Olentangy Meeting Room.

Hey Everyone! Let's meet at Belle's Bread Bakery and Cafe. There is lots of free parking and easy access to the cafe and many shops and restaurants as well. This is a great way to meet new and old friends while chatting about life and practicing English language speaking skills. All are welcome and encouraged to join us anytime between 11am and 1pm. Looking forward to seeing you soon.

Drake Lundstrom is presenting: Code Anywhere by Talking to your Phone Abstract: Have you heard the trend of people deploying code anywhere from checkout lines to doctors' offices? In this talk, you will learn how to talk to your phone and have an app on Azure to show your friend 5 minutes later. The basic DevOps tools you already know, plus a little bit of AI magic, are all you need! If you want to follow along, the demo will be in Azure with GitHub Actions and GitHub Copilot, and you can have it set up on your phone by the end of the session. Just come in with an Azure account and a GitHub repo. Join us for pizza, drinks, and networking @ Improving's office. Doors open at 5:45.

**Hello Columbus!** **The community is buzzing and growing well.** **We are thrilled to bring our third BrowserStack QA Meetup on March 12th!** We are creating a space for deeper insights, meaningful connections, and a vibe you won't want to miss. **What to expect:** * **Connect:** Network with Columbus' top engineering and QA minds. * **Learn:** Real-world tactics and trends you can use immediately. * **Enjoy:** Food, drinks, and great community spirit. **Agenda** * **[Sam Gomez](https://www.linkedin.com/in/samueljgomez/)** is presenting "AI is more than LLMs: Choosing the right AI for your needs." **RSVP Essential:** Space is limited, and we want to ensure a great experience for everyone. **RSVP now to secure your spot!** 📍 **Venue:** Leading EDJE, 6515 Longshore Loop, Suite 300, Dublin, OH 43017 📍 **Free Parking:** 6725 Longshore Street, Dublin, OH 43017 📅 **Date & Time:** March 12, 6:00 PM **Stay Connected!** Want to continue the conversation beyond the meetup? Join our **BrowserStack Discord Server** to get updates, connect with fellow QA professionals, and be part of an ongoing discussion. **Don’t miss out—click below to join!** 🔗 [\[](https://discord.gg/6SdCyWTNyW)**[Join the BrowserStack Discord Server](https://discord.gg/6SdCyWTNyW)**[\]](https://discord.gg/6SdCyWTNyW) **A Few Notes:** ✅ This is an **in-person event** ✅ **RSVP does not guarantee a seat** – A confirmation email will be sent one day before the event. **TALK ABSTRACT:** AI is all the hype these days; however, despite (or maybe because of) the excitement around it, a high percentage of AI projects fail. Projects that are over budget, delayed, or that fail to scale past the POC phase are very common. In many of these scenarios, choosing the right approach can be as critical as the solution itself. Should you build a tailored machine learning model, leverage the power of large language models (LLMs), or integrate with AI copilots? Each option has unique strengths, trade-offs, and resource requirements, and the key to success lies in aligning your choice with your business goals and technical constraints. In this talk, we will go beyond the basic concepts and definitions to provide a practical guide that allows attendees to navigate these decisions through real-world case studies. We will examine scenarios in which different AI paradigms were chosen, discuss the factors that influenced those decisions, and outline the process for evaluating needs, constraints, and outcomes. From assessing data availability and team expertise to balancing cost and scalability, you'll gain insights into the critical considerations that guide the selection process. By the end of this session, you’ll have a clear process for determining whether machine learning, LLMs, or copilots are best suited to your AI challenges and understand the resources and strategies needed to bring your chosen solution to life. This talk is ideal for decision-makers, technical leads, and innovators seeking to demystify AI implementation and maximize the impact of their investments.

Join other experienced and aspiring agile coaches and professionals to: * develop and practice your coaching skills in a peer-to-peer environment * share current successes and challenges in your work environment and get support from each other * learn from each other, build better relationships and experiment with new ideas