3D Printing

**ProductTank NoVA is back!** After a brief hiatus, we are relaunching the chapter with a format that cuts out the fluff and gets straight to the reality of building. Every product feed is flooded with AI hype right now, but what does it actually look like on the ground? Instead of a polished keynote, we are hosting **0 to 1 with AI: Real Product Talks**—a "Show & Tell" featuring 3–4 lightning talks focused on the intersection of AI and product. The framing for the talks is simple: *"Here is what I'm building, and here is what I'm stuck on."* We want to look at the messy, 0-to-1 reality of integrating AI into your workflows and products. *(Want to share what you are working on? Reach out! The bar is low-pressure, just 10–12 minutes to talk about a real AI problem you are trying to solve.)* **Agenda:** * **5:30 PM - 6:00 PM:** Doors open, networking, & name tags * **6:00 PM - 6:10 PM:** Welcome + Chapter Relaunch Intro * **6:10 PM - 7:30 PM:** Lightning Talks (Three 12-min talks + 5 mins Q&A each, with a 5-min stretch break) * **7:30 PM - 8:00 PM:** Open networking * **8:00 PM:** Soft close **Location & Logistics:** Herndon Fortnightly Library (Extended Hours Meeting Room) 768 Center St, Herndon, VA 20170 * **Parking:** We'll meet at the library, located just behind the Herndon Municipal Center. There is plenty of free public parking available around the municipal center. * **Metro & Bus:** Take the Silver Line to Herndon Metro Station, then connect via Fairfax Connector Route 921 or 950 to Historic Downtown Herndon. * **Driving (via VA-267/Dulles Toll Rd):** Take Exit 10 North (Centreville Rd, which becomes Elden St). Turn left onto Station St or Lynn St. * **Driving (via VA-286/Fairfax Co Pkwy):** Take the Elden St West exit. Turn right onto Lynn St. Looking forward to seeing everyone again and getting back to building!

Join other gamers and hobbyists to paint miniatures in the Makerspace! We provide the space, you bring your paints and minis. Limited painting supplies and 3d printed miniatures available.

Join our new group’s third meeting. Meet fellow tech enthusiasts west of the beltway. ​Because our group is new, we have a poll for the direction we want to take this new group. ​[https://submatrix.net/article/Meetups/e9ym4fr8Ca](https://submatrix.net/article/Meetups/e9ym4fr8Ca) ​For this event, we will be running a working meetup. ​Our meetings are a great place to work on and show off what you do. We are always welcoming. ​Our format is great for people who have started on but not finished one or several side projects. ​We will start off with basic introductions and what we are working on and what our goals are. We’ll break the rest of the meeting into two working sessions. In between, we’ll do a quick check-in to see how folks are going. If the RSVP is full, come anyway. We'll likely have space.

[Profs and Pints Northern Virginia](https://www.profsandpints.com/washingtondc) presents: **“Popes and Politics,”** on the history of clashes between pontiffs and world leaders, with Vanessa Corcoran, medieval historian at Georgetown University and scholar of the history of the Roman Catholic church. [Advance tickets: $13.50 plus sales tax and processing fees. Available at [https://events.ticketleap.com/tickets/profsandpints/northern-virginia-popes-politics](https://events.ticketleap.com/tickets/profsandpints/northern-virginia-popes-politics) .] President Trump recently shocked many by unleashing personal attacks on Pope Leo XIV, the first American-born pope, in a post on the Truth Social platform. Trump has been widely criticized by religious leaders for these remarks, made in response to the pontiff’s advocacy of peace with the U.S and Israel at war with Iran, and for his separate posts of AI-generated images depicting himself as a pope and as Jesus. For his part, Pope Leo has told journalists, “I am not afraid of the Trump administration,” and has found himself at the center of a heated debate over the proper role of any pope when it comes to commenting on global politics. As unsettling as such developments might be to Roman Catholics, they’re hardly unprecedented. Disagreements between popes and world leaders go back to the Middle Ages, and have played a significant role in shaping the Church and its role in the world. Explore the long history of popes’ conflicts with politicians with Vanessa Corcoran, a historian of the Roman Catholic Church who previously has given excellent talks on papal conclaves and the evolution of nativity scenes. She’ll discuss fascinating developments such as the fourteenth century Avignon Papacy, when Philip IV of France got the upper hand in a feud with the Church by pressuring a papal conclave to select a French pope and then getting the church’s leadership relocated from Rome to Avignon for nearly 70 years. In drawing parallels between recent events and medieval attacks on the Church’s authority she’ll describe how today’s anti-Church memes echo the anti-pope and anti-Catholic images that Martin Luther disseminated in large numbers with the help of woodcut printing. We’ll look at tensions between past presidents and past popes over not just wars, but issues such as abortion, stem-cell research, and abortion access. The talk will leave you with a deeper appreciation of the inherent tensions between politics and matters of faith. (Doors: $17, or $15 with a student ID. Listed time is for doors. The talk starts 30 minutes later.) Image: From an 1866 Nicolò Barabino painting of the death of Pope Boniface VIII after he was kidnapped and held captive for three days at the behest of King Philip IV of France (Usher Gallery / Wikimedia Commons).

Want to work on your project or learn new skills? Check out Weird Brothers Craft Exchange! Swap materials and skills. Find a cozy spot to work in peace. Or just enjoy the ambiance with a warm mug in hand.

Today we are Steve's Lab. RSVP and you'll be sent the location. It's in Silver Spring. ***Join us for an evening in an electronics lab where we will attempt to run clean scans of graphene and gold samples, and then clean up that data with post processing.*** This is a high sensitivity experiment, and we do not plan on being successful so early. But we've had promising results lately - so we will be putting in the time. We are NOT meeting at our usual location, but rather at Steve's house/lab. If you RSVP, you will get a DM with the address but it's located in Silver Spring. We will attempt full, clean lab - clean tip repeated scanning tests to see what we can learn and improve. We will experiment with online attendees, but if all possible showing up in person is strongly encouraged. Online join link is: - [https://meet.jit.si/mocomakers](https://meet.jit.si/mocomakers) Our community is building (and documenting for other teams) how to build a scanning tunneling microscope using a mix of common and 3D printed parts. This will allow us to scan and visualize a single atom - an ambitious we are doing over the course of a few months. The MoCo Makers community is one of the most innovative and competent groups in Maryland, and we've done everything from [publishing cancer research](https://pubmed.ncbi.nlm.nih.gov/38136356/), to [launching products](https://www.kickstarter.com/projects/gotim/cozy-curvy-multi-contour-pillow), [winning grants](https://covidinfocommons.datascience.columbia.edu/awards/2014255), and inspiring thousands. Now our biggest challenge yet has appeared. We are building a Scanning Tunneling Microscope, that will allow us to scan and visualize single atoms. To get a better idea of what we are doing, see our reference project here: [https://www.youtube.com/watch?v=7N3OqTEq08g](https://www.youtube.com/watch?v=7N3OqTEq08g) All starting CAD, code, and reference files should exist. However, let's be the first Maker community to document the build process and share it with learners around the world. We will be publishing our work here -[ https://hackaday.io/project/202816-qt-panda](https://hackaday.io/project/202816-qt-panda) If you need a ride, let us know.

Most AI meetups end up as just networking. **We’re different.** At **AI Tool Explorers Night \| Connect & Make New Friends**, you’ll: ✨ Walk away with a *real learning nugget* (a tool, workflow, or strategy you can use immediately) ✨ Connect with people who share your curiosity for AI, productivity, and automation ✨ Enjoy a fun, casual setting where new ideas and friendships spark naturally 👉 **Our promise:** every session delivers structure, substance, and takeaways you can use when you get home. ### 📅 Event Flow * **6:00–6:15 PM** → Arrivals & intros * **6:15–6:45 PM** → AI demo / learning nugget * **6:45–7:00 PM** → Q&A and group discussion * **7:00–8:00 PM** → Networking & contact sharing ⚡ Please hold networking until after the presentation so we can all learn together. Plenty of time at the end to connect and exchange cards! **Let's explore AI Tools that actually *work* in our day-to-day life!** *** #ChatGPT #Claude #Grok #Gemini #Perplexity #DeepSeek #NotebookLM #Cursor #GitHubCopilot #Replit #Windsurf #v0dev #Lovable #Zapier #Makecom #n8n #Descript #OpusClip #Synthesia #Runway #Sora #Kling #Veo #PikaLabs #LTXStudio #AdobeFirefly #Vidu #Hailuo #LumaDreamMachine #Wisecut #Elaiio #Capsule #Filmora #Gling #Magisto #AdobePremierePro #ElevenLabs #Suno #Udio #Soundraw #Riffusion #Mubert #BeatovenAI #AIVA #Loudly #SplashPro #Soundful #MagentaStudio #WavTool #MakeBestMusic #BandLabSongStarter #TadAI #EcrettMusic #Midjourney #DALLE3 #CanvaMagicStudio #NotionAI #Gamma #Fathom #FirefliesAI #MLX